-*- outline -*-
Time-stamp: <Fri Aug 30 2002 16:47:46 /bin/bash: stardate: command not found hwloidl>

* Log of installation of gum-4.06.1.tgz from source:

I did this installation on a Suse 8.0 laptop with Pentium III processor,
attached to a local network. I don't have shared dirs for PVM
installations, which means the compiled binary has to be compied to
the PVM dir on the other machines of the PVM configuration. You
don't have to recompile if the machines have same hardware and OS.
This is a PVM thing, and you can ignore it if all machines in your
PVM config share the same PVM installation.

GCC version is 2.95.3
GMP version is gmp-4.0-55
GHC version is 4.08 (fresh install, see below)

** annotated shell history

; create a source dir (where to put sources)
  108  mkdir SRCS
  109  cd SRCS
; download sources
  111  wget ftp://ftp.cee.hw.ac.uk/pub/gph/gum-4.06.1.tgz
  113  tar tvfz gum-4.06.1.tgz
  114  mkdir gum-4.06.1
  115  mv gum-4.06.1.tgz gum-4.06.1
  116  cd gum-4.06.1
; extract sources
  117  tar xvfz gum-4.06.1.tgz
  118  mv gum-4.06.1.tgz ~/ftp/
  119  cd ~
; create a build dir (arch specific)
  120  mkdir BUILDS
  121  cd BUILDS/
  122  mkdir gum-4.06.1
  126  lndir ~/SRCS/gum-4.06.1 gum-4.06.1
  127  cd gum-4.06.1/
  128  ls
  129  cd fptools/
  130  ls
; hand-edited build.mk (see attached file)
  131  cat >build.mk
  132  less build.mk
;; now, install GHC-4.08 (if not already there; otw modify build.mk)
  134  pushd ~/ftp
  138  tar xvfz ghc-4.08.2-i386-unknown-linux.tar.bz2
  139  bunzip2 ghc-4.08.2-i386-unknown-linux.tar.bz2
  140  tar xvf ghc-4.08.2-i386-unknown-linux.tar.bz2
  141  tar xvf ghc-4.08.2-i386-unknown-linux.tar
  142  cd ghc-4.08.2/
  143  ls
;; pick a place where to install it
  144  ./configure --prefix=/soft/TCS
  145  make install
  146  popd
;; the WithGHC field must point to the installed ghc
  147  less build.mk
  148  ls -la /soft/TCS/bin/ghc-4.08.2
  149  pwd
  150  ls
  151  cp build.mk mk/
; autoconf seems to BROKEN (use attached configure instead)!!!!
  152  autoconf
  153  cd ghc/
  154  autoconf
  155  cd ..
; I moved a configure copied from another installation in here
  158  mv ../../configure .
  159  ./configure
  160  make boot
;; install PVM if not already available (I downloaded into ftp )
  163  cd ~/ftp
  164  ls
  165  mv pvm3.4.3.tgz ~
  166  cd ~
  167  tar xvfz pvm3.4.3.tgz
  168  cd pvm3
  171  less Readme
;; where to install PVM
  172  PVM_ROOT=${HOME}/pvm3
  173  PVM_ARCH=${PVM_ROOT}/lib/pvmgetarch
  174  echo $PVM_ARCH
  175  PVM_ARCH=`${PVM_ROOT}/lib/pvmgetarch`
  176  echo $PVM_ARCH
  177  pwd
  178  make
  179  cd ~/BUILDS/gum-4.06.1/
  180  l
  181  cd fptools/
  182  l
; this should build ok now
  183  make all 1>make.log 2>&1 &
  184  tail -f make.log

* Testing

Download gum-4.06-test-prgs.tgz from the FTP server
ftp://ftp.cee.hw.ac.uk/pub/gph.
To use its Makefile also download Makefile.common and
Makefile.boot and put them in the top dir of the
extracted test program bundle.

Go into parfib and type
 make parfib_mp
If your version of gum is called differently from gum-4.06 do
 make GHC=<my_gum> parfib_mp

Configure PVM (see READMEs) and run program via
 ./parfib_mp 35 11 +RTS -qp2 -qP -sstderr

Download gum-4.06-visualisation.tgz from FTP server, put extracted
files in your path. You might have to adjust first lines of the
scripts to point to /usr/bin/perl etc.
Then call 
 grs2gr =*parfib*.???>gr > pf.gr
 gr2ps pf.gr
 gv pf.ps

* Files:

** build.mk

# Compiler to use for building ghc (same as ./configure --with-hc=... )
WithGhcHc = /soft/TCS/bin/ghc-4.08.2

# Option flags to pass to GHC when it's compiling RTS modules
# This is a good way to set things like -optc-g and -optc-DDEBUG for the RTS.
# GhcRtsHcOpts is used when compiling .hc files.
# GhcRtsCcOpts is used when compiling .c  files.

GhcRtsHcOpts=
#GhcRtsCcOpts=
#-optc-g -optc-DDEBUG
GhcRtsCcOpts= -optc-O

# parallel ticky RTS monitoring
WAY_mp_CC_OPTS= -optc-DAVOID_LOCAL_SPARKS

# What extra ways to build the libraries in
# In addition to the normal sequential way, the default is to also build
# profiled prelude libraries.
# When booting from .hc files, turn this off.
GhcLibWays= mp
# ToDo: add mg s

# ushas option: be verbose when building the libraries to see where we crash
# HWL: for debugging GranSim generate .hc and .s files
# GhcLibHcOpts += -keep-hc-files-too -keep-s-files-too


** configure

#! /bin/sh























# LocalWords:  fi
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13 
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.

# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
  --with-hc=<haskell compiler>
        Use a command different from 'ghc' to compile up Haskell code.
        (no claims currently made that this will work with a compiler other than a
         recent version of GHC, but you could always try...)
"
ac_help="$ac_help
  --with-gcc=<gcc command>
        Use a different command instead of 'gcc' for the GNU C compiler.
"
ac_help="$ac_help
  --enable-hc-boot
        Boot the Glasgow Haskell Compiler from intermediate .hc files.
        (This option is mostly of interest to porters.)
"
ac_help="$ac_help
  --enable-win32-dlls
        If on a Win32 platform running mingw32/cygwin, enable the
	construction of DLLs containing ghc-compiled code.
"

# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'

# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12

ac_prev=
for ac_option
do

  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval "$ac_prev=\$ac_option"
    ac_prev=
    continue
  fi

  case "$ac_option" in
  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) ac_optarg= ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case "$ac_option" in

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir="$ac_optarg" ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build="$ac_optarg" ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file="$ac_optarg" ;;

  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
  | --da=*)
    datadir="$ac_optarg" ;;

  -disable-* | --disable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    eval "enable_${ac_feature}=no" ;;

  -enable-* | --enable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "enable_${ac_feature}='$ac_optarg'" ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix="$ac_optarg" ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he)
    # Omit some internal or obsolete options to make the list less imposing.
    # This message is too long to be a string in the A/UX 3.1 sh.
    cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
  --cache-file=FILE       cache test results in FILE
  --help                  print this message
  --no-create             do not create output files
  --quiet, --silent       do not print \`checking...' messages
  --version               print the version of autoconf that created configure
Directory and file names:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [same as prefix]
  --bindir=DIR            user executables in DIR [EPREFIX/bin]
  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
  --datadir=DIR           read-only architecture-independent data in DIR
                          [PREFIX/share]
  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
                          [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
  --includedir=DIR        C header files in DIR [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
  --infodir=DIR           info documentation in DIR [PREFIX/info]
  --mandir=DIR            man documentation in DIR [PREFIX/man]
  --srcdir=DIR            find the sources in DIR [configure dir or ..]
  --program-prefix=PREFIX prepend PREFIX to installed program names
  --program-suffix=SUFFIX append SUFFIX to installed program names
  --program-transform-name=PROGRAM
                          run sed PROGRAM on installed program names
EOF
    cat << EOF
Host type:
  --build=BUILD           configure for building on BUILD [BUILD=HOST]
  --host=HOST             configure for HOST [guessed]
  --target=TARGET         configure for TARGET [TARGET=HOST]
Features and packages:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --x-includes=DIR        X include files are in DIR
  --x-libraries=DIR       X library files are in DIR
EOF
    if test -n "$ac_help"; then
      echo "--enable and --with options recognized:$ac_help"
    fi
    exit 0 ;;

  -host | --host | --hos | --ho)
    ac_prev=host ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host="$ac_optarg" ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir="$ac_optarg" ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir="$ac_optarg" ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir="$ac_optarg" ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir="$ac_optarg" ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst \
  | --locals | --local | --loca | --loc | --lo)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
    localstatedir="$ac_optarg" ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir="$ac_optarg" ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir="$ac_optarg" ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix="$ac_optarg" ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix="$ac_optarg" ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix="$ac_optarg" ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name="$ac_optarg" ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir="$ac_optarg" ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir="$ac_optarg" ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site="$ac_optarg" ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir="$ac_optarg" ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir="$ac_optarg" ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target="$ac_optarg" ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers)
    echo "configure generated by autoconf version 2.13"
    exit 0 ;;

  -with-* | --with-*)
    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "with_${ac_package}='$ac_optarg'" ;;

  -without-* | --without-*)
    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    eval "with_${ac_package}=no" ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes="$ac_optarg" ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries="$ac_optarg" ;;

  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
    ;;

  *)
    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
      echo "configure: warning: $ac_option: invalid host type" 1>&2
    fi
    if test "x$nonopt" != xNONE; then
      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
    fi
    nonopt="$ac_option"
    ;;

  esac
done

if test -n "$ac_prev"; then
  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>./config.log

echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5

# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
  case "$ac_arg" in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
  esac
done

# NLS nuisances.
# Only set these to C if already set.  These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=mk/config.mk.in

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then its parent.
  ac_prog=$0
  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
  srcdir=$ac_confdir
  if test ! -r $srcdir/$ac_unique_file; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
  if test "$ac_srcdir_defaulted" = yes; then
    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
  else
    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
  fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`

# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    echo "loading site script $ac_site_file"
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='	'
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi



ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.

subdirs="ghc"


# -------------------------------------------------------------------------
# Prepare to generate the following header files
#
#


# No, semi-sadly, we don't do `--srcdir'...
if test x"$srcdir" != 'x.' ; then
    echo "This configuration does not support the \`--srcdir' option.."
    exit 1
fi

#
# Remove common automounter nonsense + convert from UNC to DOS style paths
# (UNC awareness isn't quite there yet for cygwin32-beta18 and consituent tools.)
#
hardtop=`pwd`
hardtop=`echo $hardtop | sed 's|^/tmp_mnt.*\(/local/.*\)$|\1|' | sed 's|^/tmp_mnt/|/|' | sed 's|^/grasp_tmp|/local/grasp_tmp|' | sed 's|^//\(.\)/|\1:/|' `

echo ''
echo "*** The top of your build tree is: $hardtop"




# Do some error checking and defaulting for the host and target type.
# The inputs are:
#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
#
# The rules are:
# 1. You are not allowed to specify --host, --target, and nonopt at the
#    same time.
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
#    as determined by config.guess.
# 4. Target and build default to nonopt.
# 5. If nonopt is not specified, then target and build default to host.

# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
case $host---$target---$nonopt in
NONE---*---* | *---NONE---* | *---*---NONE) ;;
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac


# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:643: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6

echo $ac_n "checking target system type""... $ac_c" 1>&6
echo "configure:664: checking target system type" >&5

target_alias=$target
case "$target_alias" in
NONE)
  case $nonopt in
  NONE) target_alias=$host_alias ;;
  *) target_alias=$nonopt ;;
  esac ;;
esac

target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6

echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:682: checking build system type" >&5

build_alias=$build
case "$build_alias" in
NONE)
  case $nonopt in
  NONE) build_alias=$host_alias ;;
  *) build_alias=$nonopt ;;
  esac ;;
esac

build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6

test "$host_alias" != "$target_alias" &&
  test "$program_prefix$program_suffix$program_transform_name" = \
    NONENONEs,x,x, &&
  program_prefix=${target_alias}-


# "$host" defaults to "$target"
if test "x$host" = xNONE ; then
    host=$target
fi

BuildPlatform=`/bin/sh $srcdir/config.sub $build` || exit 1
HostPlatform=`/bin/sh $srcdir/config.sub $host` || exit 1
TargetPlatform=`/bin/sh $srcdir/config.sub $target` || exit 1

if test x"$TargetPlatform" != x"$HostPlatform" ; then
    echo "GHC configuration does not support differing host/target (i.e., cross-compiling)"
    exit 1
fi

exeext=''
#
# The following will be more difficult when we *are* cross-compiling.
# Suitable names to slam in *_CPP are in platform.h.in.
# We also record the architecture, vendor, and operating system (OS)
# separately.
case $HostPlatform in
alpha-dec-osf[12]*)
	HostPlatform=alpha-dec-osf1   # canonicalise for our purposes
	TargetPlatform=alpha-dec-osf1 # this will work for now... (hack)
	BuildPlatform=alpha-dec-osf1  # hack
        HostPlatform_CPP='alpha_dec_osf1'
        HostArch_CPP='alpha'
        HostVendor_CPP='dec'
        HostOS_CPP='osf1'
        ;;
alpha-dec-osf[34]*)
	HostPlatform=alpha-dec-osf3   # canonicalise for our purposes
	TargetPlatform=alpha-dec-osf3 # this will work for now... (hack)
	BuildPlatform=alpha-dec-osf3  # hack
        HostPlatform_CPP='alpha_dec_osf3'
        HostArch_CPP='alpha'
        HostVendor_CPP='dec'
        HostOS_CPP='osf3'
        ;;
alpha-unknown-linux)
	HostPlatform=alpha-unknown-linux
	TargetPlatform=alpha-unknown-linux
	BuildPlatform=alpha-unknown-linux
        HostPlatform_CPP='alpha_unknown_linux'
        HostArch_CPP='alpha'
        HostVendor_CPP='unknown'
        HostOS_CPP='linux'
        ;;
alpha-unknown-freebsd*)
	HostPlatform=alpha-unknown-freebsd
	TargetPlatform=alpha-unknown-freebsd
	BuildPlatform=alpha-unknown-freebsd
        HostPlatform_CPP='alpha_unknown_freebsd'
        HostArch_CPP='alpha'
        HostVendor_CPP='unknown'
        HostOS_CPP='freebsd'
        ;;
hppa1.1-hp-hpux*)
	HostPlatform=hppa1.1-hp-hpux  # canonicalise for our purposes (hack)
	TargetPlatform=hppa1.1-hp-hpux
	BuildPlatform=hppa1.1-hp-hpux
        HostPlatform_CPP='hppa1_1_hp_hpux'
        HostArch_CPP='hppa1_1'
        HostVendor_CPP='hp'
        HostOS_CPP='hpux'
        ;;
i[3456]86-*-linuxaout*)
	HostPlatform=i386-unknown-linuxaout   # hack again
	TargetPlatform=i386-unknown-linuxaout
	BuildPlatform=i386-unknown-linuxaout
        HostPlatform_CPP='i386_unknown_linuxaout'
        HostArch_CPP='i386'
        HostVendor_CPP='unknown'
        HostOS_CPP='linuxaout'
        ;;
i[3456]86-*-linux*)
	HostPlatform=i386-unknown-linux # hack again
	TargetPlatform=i386-unknown-linux
	BuildPlatform=i386-unknown-linux
        HostPlatform_CPP='i386_unknown_linux'
        HostArch_CPP='i386'
        HostVendor_CPP='unknown'
        HostOS_CPP='linux'
        ;;
i[3456]86-*-freebsd[3-9]*) # FreeBSD 3.0+ uses ELF
	HostPlatform=i386-unknown-freebsd # hack again
	TargetPlatform=i386-unknown-freebsd
	BuildPlatform=i386-unknown-freebsd
        HostPlatform_CPP='i386_unknown_freebsd'
        HostArch_CPP='i386'
        HostVendor_CPP='unknown'
        HostOS_CPP='freebsd'
        ;;
i[3456]86-*-freebsd2*) # Older FreeBSDs are a.out
	HostPlatform=i386-unknown-freebsd2 # hack again
	TargetPlatform=i386-unknown-freebsd2
	BuildPlatform=i386-unknown-freebsd2
        HostPlatform_CPP='i386_unknown_freebsd2'
        HostArch_CPP='i386'
        HostVendor_CPP='unknown'
        HostOS_CPP='freebsd2'
        ;;
i[3456]86-*-netbsd*)
	HostPlatform=i386-unknown-netbsd # hack again
	TargetPlatform=i386-unknown-netbsd
	BuildPlatform=i386-unknown-netbsd
        HostPlatform_CPP='i386_unknown_netbsd'
        HostArch_CPP='i386'
        HostVendor_CPP='unknown'
        HostOS_CPP='netbsd'
        ;;
i[3456]86-*-solaris2*)
	HostPlatform=i386-unknown-solaris2 # hack again
	TargetPlatform=i386-unknown-solaris2
	BuildPlatform=i386-unknown-solaris2
        HostPlatform_CPP='i386_unknown_solaris2'
        HostArch_CPP='i386'
        HostVendor_CPP='unknown'
        HostOS_CPP='solaris2'
        ;;
i[3456]86-*-cygwin32*)
	HostPlatform=i386-unknown-cygwin32 # hack again
	TargetPlatform=i386-unknown-cygwin32
	BuildPlatform=i386-unknown-cygwin32
        HostPlatform_CPP='i386_unknown_cygwin32'
        HostArch_CPP='i386'
        HostVendor_CPP='unknown'
        HostOS_CPP='cygwin32'
	exeext='.exe'
        ;;
i[3456]86-*-mingw32*)
	HostPlatform=i386-unknown-mingw32 # hack again
	TargetPlatform=i386-unknown-mingw32
	BuildPlatform=i386-unknown-mingw32
        HostPlatform_CPP='i386_unknown_mingw32'
        HostArch_CPP='i386'
        HostVendor_CPP='unknown'
        HostOS_CPP='mingw32'
	exeext='.exe'
	# We assume you're using mingw32 via the gcc that comes
	# with cygwin, and not the native port, so let's augment
	# the gcc command-line used here with -mno-cygwin to
	# arrange for good things to happen.
	CFLAGS="-mno-cygwin $CFLAGS"
        ;;
m68k-next-nextstep2)
        HostPlatform_CPP='m68k_next_nextstep2'
        HostArch_CPP='m68k'
        HostVendor_CPP='next'
        HostOS_CPP='nextstep2'
        ;;
m68k-next-nextstep3)
        HostPlatform_CPP='m68k_next_nextstep3'
        HostArch_CPP='m68k'
        HostVendor_CPP='next'
        HostOS_CPP='nextstep3'
        ;;
i[3456]86-next-nextstep3)
	HostPlatform=i386-next-nextstep3 # hack again
	TargetPlatform=i386-next-nextstep3
	BuildPlatform=i386-next-nextstep3
        HostPlatform_CPP='i386_next_nextstep3'
        HostArch_CPP='i386'
        HostVendor_CPP='next'
        HostOS_CPP='nextstep3'
        ;;
m68k-sun-sunos4*)
	HostPlatform=m68k-sun-sunos4
	TargetPlatform=m68k-sun-sunos4 #hack
	BuildPlatform=m68k-sun-sunos4 #hack
        HostPlatform_CPP='m68k_sun_sunos4'
        HostArch_CPP='m68k'
        HostVendor_CPP='sun'
        HostOS_CPP='sunos4'
        ;;
mips-dec-ultrix*)
        HostPlatform_CPP='mips_dec_ultrix'
        HostArch_CPP='mipsel'   # NB a little different
        HostVendor_CPP='dec'
        HostOS_CPP='ultrix'
        ;;
mips-sgi-irix*)
	HostPlatform=mips-sgi-irix
	TargetPlatform=mips-sgi-irix #hack
	BuildPlatform=mips-sgi-irix #hack
        HostPlatform_CPP='mips_sgi_irix'
        HostArch_CPP='mipseb'   # NB a little different
        HostVendor_CPP='sgi'
        HostOS_CPP='irix'
        ;;
rs6000-ibm-aix*)
	HostPlatform=rs6000-ibm-aix
	TargetPlatform=rs6000-ibm-aix #hack
	BuildPlatform=rs6000-ibm-aix #hack
        HostPlatform_CPP='rs6000_ibm_aix'
        HostArch_CPP='rs6000'
        HostVendor_CPP='ibm'
        HostOS_CPP='aix'
        ;;
powerpc-ibm-aix*)
	HostPlatform=powerpc-ibm-aix
	TargetPlatform=powerpc-ibm-aix #hack
	BuildPlatform=powerpc-ibm-aix #hack
        HostPlatform_CPP='powerpc_ibm_aix'
        HostArch_CPP='powerpc'
        HostVendor_CPP='ibm'
        HostOS_CPP='aix'
        ;;
sparc-sun-sunos4*)
	HostPlatform=sparc-sun-sunos4
	TargetPlatform=sparc-sun-sunos4 #hack
	BuildPlatform=sparc-sun-sunos4 #hack
        HostPlatform_CPP='sparc_sun_sunos4'
        HostArch_CPP='sparc'
        HostVendor_CPP='sun'
        HostOS_CPP='sunos4'
        ;;
sparc-sun-solaris2*)
	HostPlatform=sparc-sun-solaris2
	TargetPlatform=sparc-sun-solaris2 #hack
	BuildPlatform=sparc-sun-solaris2 #hack
        HostPlatform_CPP='sparc_sun_solaris2'
        HostArch_CPP='sparc'
        HostVendor_CPP='sun'
        HostOS_CPP='solaris2'
        ;;
*)
        echo "Unrecognised platform: $HostPlatform"
        exit 1
        ;;
esac
echo "Canonicalised to: $HostPlatform"
test  x"$HostPlatform" != x"$TargetPlatform" && echo "Target platform set to $TargetPlatform"
test  x"$BuildPlatform" != x"$HostPlatform"  && echo "Build platform set to $BuildPlatform"

BuildPlatform_CPP=$HostPlatform_CPP
TargetPlatform_CPP=$HostPlatform_CPP
BuildArch_CPP=$HostArch_CPP
TargetArch_CPP=$HostArch_CPP
BuildOS_CPP=$HostOS_CPP
HostOS_Full=$host_os
TargetOS_CPP=$HostOS_CPP
BuildVendor_CPP=$HostVendor_CPP
TargetVendor_CPP=$HostVendor_CPP















# Extract the first word of "ghc", so it can be a program name with args.
set dummy ghc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:967: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GHC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GHC" in
  /*)
  ac_cv_path_GHC="$GHC" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GHC="$GHC" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GHC="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
GHC="$ac_cv_path_GHC"
if test -n "$GHC"; then
  echo "$ac_t""$GHC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

for ac_prog in nhc nhc98
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1004: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_NHC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$NHC" in
  /*)
  ac_cv_path_NHC="$NHC" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_NHC="$NHC" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_NHC="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
NHC="$ac_cv_path_NHC"
if test -n "$NHC"; then
  echo "$ac_t""$NHC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

test -n "$NHC" && break
done

# Extract the first word of "hbc", so it can be a program name with args.
set dummy hbc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1042: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_HBC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$HBC" in
  /*)
  ac_cv_path_HBC="$HBC" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_HBC="$HBC" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_HBC="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
HBC="$ac_cv_path_HBC"
if test -n "$HBC"; then
  echo "$ac_t""$HBC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi



# Check whether --with-hc or --without-hc was given.
if test "${with_hc+set}" = set; then
  withval="$with_hc"
  WithHc="$withval"
else
  WithHc=$GHC

fi



# Check whether --with-gcc or --without-gcc was given.
if test "${with_gcc+set}" = set; then
  withval="$with_gcc"
  WhatGccIsCalled="$withval"
else
  WhatGccIsCalled="gcc"

fi



# Check whether --enable-hc-boot or --disable-hc-boot was given.
if test "${enable_hc_boot+set}" = set; then
  enableval="$enable_hc_boot"
  BootingFromHc=YES
else
  BootingFromHc=NO

fi




# Check whether --enable-win32-dlls or --disable-win32-dlls was given.
if test "${enable_win32_dlls+set}" = set; then
  enableval="$enable_win32_dlls"
  
case $HostOS_CPP in
cygwin32) ;;
mingw32)  ;;
*)    echo "Unrecognised win32 platform: $HostPlatform"
      exit 1
      ;;
esac
EnableWin32DLLs=YES

else
  EnableWin32DLLs=NO

fi


if test x"$EnableWin32DLLs" = "xYES" ; then
 cat >> confdefs.h <<\EOF
#define HAVE_WIN32_DLL_SUPPORT 1
EOF

fi




# Pull the hash mark out of the macro call to avoid m4 problems.
ac_msg="whether #! works in shell scripts"
echo $ac_n "checking $ac_msg""... $ac_c" 1>&6
echo "configure:1142: checking $ac_msg" >&5
if eval "test \"`echo '$''{'ac_cv_sys_interpreter'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo '#! /bin/cat
exit 69
' > conftest
chmod u+x conftest
(SHELL=/bin/sh; export SHELL; ./conftest >/dev/null)
if test $? -ne 69; then
   ac_cv_sys_interpreter=yes
else
   ac_cv_sys_interpreter=no
fi
rm -f conftest
fi

echo "$ac_t""$ac_cv_sys_interpreter" 1>&6
interpval="$ac_cv_sys_interpreter"


# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1166: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PerlCmd'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$PerlCmd" in
  /*)
  ac_cv_path_PerlCmd="$PerlCmd" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_PerlCmd="$PerlCmd" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_PerlCmd="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
PerlCmd="$ac_cv_path_PerlCmd"
if test -n "$PerlCmd"; then
  echo "$ac_t""$PerlCmd" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$PerlCmd"; then
   echo "You must install perl before you can continue"
   echo "Perhaps it is already installed, but not in your PATH?"
   exit 1
else
$PerlCmd -v >conftest.out 2>&1
if grep "version 4" conftest.out >/dev/null 2>&1; then
   if grep "Patch level: 35" conftest.out >/dev/null 2>&1; then
      echo "
************************************************************************
Uh-oh...looks like you have Perl 4.035.

Perl version 4.035 has a bug to do with recursion that will bite if
you run the lit2texi script, when making Info files from
literate files of various sorts.  Either use perl5, the last version of perl4 
(4.036), or an older version (e.g., perl 4.019). Failing that, don't create
any Info files :-)
************************************************************************
"
   fi
else
   if grep "version 5" conftest.out >/dev/null 2>&1; then
      :
   else
     echo "I'm not sure if your version of perl will work,"
     echo "but it's worth a shot, eh?"
   fi
fi
rm -fr conftest*

fi

echo $ac_n "checking if your perl works in shell scripts""... $ac_c" 1>&6
echo "configure:1231: checking if your perl works in shell scripts" >&5
if eval "test \"`echo '$''{'fptools_cv_shebang_perl'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo "#!$PerlCmd"'
exit ;
' > conftest
chmod u+x conftest
(SHELL=/bin/sh; export SHELL; ./conftest 69 > /dev/null)
if test $? -ne 69; then
   fptools_cv_shebang_perl=yes
else
   fptools_cv_shebang_perl=no
fi
rm -f conftest

fi

echo "$ac_t""$fptools_cv_shebang_perl" 1>&6

# Extract the first word of "bash", so it can be a program name with args.
set dummy bash; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1254: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_BashCmd'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$BashCmd" in
  /*)
  ac_cv_path_BashCmd="$BashCmd" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_BashCmd="$BashCmd" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_BashCmd="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
BashCmd="$ac_cv_path_BashCmd"
if test -n "$BashCmd"; then
  echo "$ac_t""$BashCmd" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1290: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="gcc"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1320: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_prog_rejected=no
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
	continue
      fi
      ac_cv_prog_CC="cc"
      break
    fi
  done
  IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# -gt 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    set dummy "$ac_dir/$ac_word" "$@"
    shift
    ac_cv_prog_CC="$@"
  fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test -z "$CC"; then
    case "`uname -s`" in
    *win32* | *WIN32*)
      # Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1371: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="cl"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
 ;;
    esac
  fi
  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi

echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1403: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext << EOF

#line 1414 "configure"
#include "confdefs.h"

main(){return(0);}
EOF
if { (eval echo configure:1419: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cc_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cc_cross=no
  else
    ac_cv_prog_cc_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1445: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross

echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1450: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1459: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gcc=yes
else
  ac_cv_prog_gcc=no
fi
fi

echo "$ac_t""$ac_cv_prog_gcc" 1>&6

if test $ac_cv_prog_gcc = yes; then
  GCC=yes
else
  GCC=
fi

ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1478: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
  ac_cv_prog_cc_g=yes
else
  ac_cv_prog_cc_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi

echo $ac_n "checking whether you have an ok gcc""... $ac_c" 1>&6
echo "configure:1510: checking whether you have an ok gcc" >&5
if eval "test \"`echo '$''{'fptools_cv_have_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -z "$GCC"; then
    echo ''
    echo "You would be better off with gcc"
    echo "Perhaps it is already installed, but not in your PATH?"
    fptools_cv_have_gcc='no'
else
    cmd_string="`$CC -v 2>&1 | grep 'version ' | sed -e 's/.*version [^0-9]*\([0-9][0-9]*\)\.\([0-9][0-9]*\).*/expr 20 \\\< \1 \\\* 10 + \2/g' `"
    if test `eval $cmd_string 2>/dev/null` != "1"; then
	echo ''
        echo "I'm not sure if your version of gcc will work,"
        echo "but it's worth a shot, eh?"
    fi
    fptools_cv_have_gcc='yes'
fi

fi

echo "$ac_t""$fptools_cv_have_gcc" 1>&6
HaveGcc=`echo $fptools_cv_have_gcc | sed 'y/yesno/YESNO/'`



echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1537: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 1552 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1558: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -E -traditional-cpp"
  cat > conftest.$ac_ext <<EOF
#line 1569 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1575: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -nologo -E"
  cat > conftest.$ac_ext <<EOF
#line 1586 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1592: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
  ac_cv_prog_CPP="$CPP"
fi
  CPP="$ac_cv_prog_CPP"
else
  ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6


echo $ac_n "checking for ok way to do context diffs""... $ac_c" 1>&6
echo "configure:1618: checking for ok way to do context diffs" >&5
if eval "test \"`echo '$''{'fptools_cv_context_diffs'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo foo > conftest1
echo foo > conftest2
if diff -C 1 conftest1 conftest2 > /dev/null 2>&1 ; then
    fptools_cv_context_diffs='diff -C 1'
else
    if diff -c1 conftest1 conftest2 > /dev/null 2>&1 ; then
        fptools_cv_context_diffs='diff -c1'
    else
        echo "Can't figure out how to do context diffs."
        echo "Neither \`diff -C 1' nor \`diff -c1' works."
        exit 1
    fi
fi
rm -f conftest1 conftest2

fi

echo "$ac_t""$fptools_cv_context_diffs" 1>&6
ContextDiffCmd=$fptools_cv_context_diffs



# Extract the first word of "find", so it can be a program name with args.
set dummy find; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1647: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_FindCmd'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$FindCmd" in
  /*)
  ac_cv_path_FindCmd="$FindCmd" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_FindCmd="$FindCmd" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_FindCmd="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
FindCmd="$ac_cv_path_FindCmd"
if test -n "$FindCmd"; then
  echo "$ac_t""$FindCmd" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


for ac_prog in 'bison -y' byacc
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1685: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$YACC"; then
  ac_cv_prog_YACC="$YACC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_YACC="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
YACC="$ac_cv_prog_YACC"
if test -n "$YACC"; then
  echo "$ac_t""$YACC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

test -n "$YACC" && break
done
test -n "$YACC" || YACC="yacc"

if test "$YACC" = "yacc"; then
   echo $ac_n "checking if it is an OK yacc""... $ac_c" 1>&6
echo "configure:1717: checking if it is an OK yacc" >&5
if eval "test \"`echo '$''{'ac_cv_prog_yacc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # Extract the first word of "what", so it can be a program name with args.
set dummy what; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1724: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WhatCmd'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$WhatCmd"; then
  ac_cv_prog_WhatCmd="$WhatCmd" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_WhatCmd="what"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_WhatCmd" && ac_cv_prog_WhatCmd=":"
fi
fi
WhatCmd="$ac_cv_prog_WhatCmd"
if test -n "$WhatCmd"; then
  echo "$ac_t""$WhatCmd" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

    $WhatCmd $YACC > conftest.out
    if egrep 'y1\.c 1\..*SMI' conftest.out >/dev/null 2>&1; then
        echo "I don't trust your $YaccCmd; it looks like an old Sun yacc"
        if test -f /usr/lang/yacc; then
           echo "I'm going to use /usr/lang/yacc instead"
           ac_cv_prog_yacc=/usr/lang/yacc
        else
           echo "I'm assuming the worst...no parser generator at all"
           ac_cv_prog_yacc=:
        fi
    elif egrep 'y1\.c.*Revision: 4\.2\.6\.3.*DEC' conftest.out >/dev/null 2>&1; then
        echo "I don't trust your $YaccCmd; it looks like a lame DEC yacc"
        echo "I'm assuming the worst...no parser generator at all"
        ac_cv_prog_yacc=:
    else
	ac_cv_prog_yacc=$YACC
    fi
    rm -fr conftest*

fi

echo "$ac_t""$ac_cv_prog_yacc" 1>&6
else
    ac_cv_prog_yacc=$YACC
fi
YaccCmd=$ac_cv_prog_yacc



# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1783: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$LEX"; then
  ac_cv_prog_LEX="$LEX" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_LEX="flex"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
fi
fi
LEX="$ac_cv_prog_LEX"
if test -n "$LEX"; then
  echo "$ac_t""$LEX" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$LEXLIB"
then
  case "$LEX" in
  flex*) ac_lib=fl ;;
  *) ac_lib=l ;;
  esac
  echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
echo "configure:1817: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1825 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char yywrap();

int main() {
yywrap()
; return 0; }
EOF
if { (eval echo configure:1836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LEXLIB="-l$ac_lib"
else
  echo "$ac_t""no" 1>&6
fi

fi



# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:1872: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
  for ac_dir in $PATH; do
    # Account for people who put trailing slashes in PATH elements.
    case "$ac_dir/" in
    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if test -f $ac_dir/$ac_prog; then
	  if test $ac_prog = install &&
            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done
  IFS="$ac_save_IFS"

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL="$ac_cv_path_install"
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL="$ac_install_sh"
  fi
fi
echo "$ac_t""$INSTALL" 1>&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'


cat >> confdefs.h <<\EOF
#define HAVE_BIN_SH 1
EOF


# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1933: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_ArCmd'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$ArCmd" in
  /*)
  ac_cv_path_ArCmd="$ArCmd" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_ArCmd="$ArCmd" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_ArCmd="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
ArCmd="$ac_cv_path_ArCmd"
if test -n "$ArCmd"; then
  echo "$ac_t""$ArCmd" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$ArCmd"; then
    echo "You don't seem to have ar in your PATH...I have no idea how to make a library"
    exit 1;
fi
if $ArCmd clqs conftest.a >/dev/null 2>/dev/null; then
    ArCmd="$ArCmd clqs"
    NeedRanLib=''
elif $ArCmd cqs conftest.a >/dev/null 2>/dev/null; then
    ArCmd="$ArCmd cqs"
    NeedRanLib=''
elif $ArCmd clq conftest.a >/dev/null 2>/dev/null; then
    ArCmd="$ArCmd clq"
    NeedRanLib='YES'
elif $ArCmd cq conftest.a >/dev/null 2>/dev/null; then
    ArCmd="$ArCmd cq"
    NeedRanLib='YES'
elif $ArCmd cq conftest.a 2>&1 | grep 'no archive members specified' >/dev/null 2>/dev/null; then
    ArCmd="$ArCmd cq"
    NeedRanLib='YES'
else
    echo "I can't figure out how to use your $ArCmd"
    exit 1
fi
rm -rf conftest*
test -n "$ArCmd" && test -n "$verbose" && echo "        setting ArCmd to $ArCmd"

if test -z "$NeedRanLib"; then
    RANLIB=':'
    test -n "$verbose" && echo "        setting RANLIB to $RANLIB"
    
else
    # Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1999: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

fi



echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:2031: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
  rm -f conftestdata
  ac_cv_prog_LN_S="ln -s"
else
  ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi



# Extract the first word of "sed", so it can be a program name with args.
set dummy sed; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2056: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_SedCmd'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$SedCmd" in
  /*)
  ac_cv_path_SedCmd="$SedCmd" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_SedCmd="$SedCmd" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_SedCmd="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
SedCmd="$ac_cv_path_SedCmd"
if test -n "$SedCmd"; then
  echo "$ac_t""$SedCmd" 1>&6
else
  echo "$ac_t""no" 1>&6
fi



# Extract the first word of "time", so it can be a program name with args.
set dummy time; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2093: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_TimeCmd'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$TimeCmd" in
  /*)
  ac_cv_path_TimeCmd="$TimeCmd" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_TimeCmd="$TimeCmd" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_TimeCmd="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
TimeCmd="$ac_cv_path_TimeCmd"
if test -n "$TimeCmd"; then
  echo "$ac_t""$TimeCmd" 1>&6
else
  echo "$ac_t""no" 1>&6
fi



for ac_prog in gtar tar
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2132: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_TarCmd'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$TarCmd" in
  /*)
  ac_cv_path_TarCmd="$TarCmd" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_TarCmd="$TarCmd" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_TarCmd="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
TarCmd="$ac_cv_path_TarCmd"
if test -n "$TarCmd"; then
  echo "$ac_t""$TarCmd" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

test -n "$TarCmd" && break
done
test -n "$TarCmd" || TarCmd="tar"


for ac_prog in gzip compress
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2174: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_CompressCmd'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$CompressCmd" in
  /*)
  ac_cv_path_CompressCmd="$CompressCmd" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_CompressCmd="$CompressCmd" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_CompressCmd="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
CompressCmd="$ac_cv_path_CompressCmd"
if test -n "$CompressCmd"; then
  echo "$ac_t""$CompressCmd" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

test -n "$CompressCmd" && break
done
test -n "$CompressCmd" || CompressCmd="gzip"


compress_nm=`basename $CompressCmd`
if test x"$compress_nm" = xgzip; then
  CompressCmd="$CompressCmd -d"
  CompressSuffix="gz"
else
  CompressSuffix="Z"
fi



if (test "$BootingFromHc" = "NO"); then
# Extract the first word of "happy", so it can be a program name with args.
set dummy happy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2225: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_HappyCmd'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$HappyCmd" in
  /*)
  ac_cv_path_HappyCmd="$HappyCmd" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_HappyCmd="$HappyCmd" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_HappyCmd="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
HappyCmd="$ac_cv_path_HappyCmd"
if test -n "$HappyCmd"; then
  echo "$ac_t""$HappyCmd" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

echo $ac_n "checking for version of happy""... $ac_c" 1>&6
echo "configure:2258: checking for version of happy" >&5
if eval "test \"`echo '$''{'fptools_cv_happy_version'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test x"$HappyCmd" != x; then
   fptools_cv_happy_version="`$HappyCmd -v |
			  grep 'Happy Version' | sed -e 's/Happy Version \([^ ]*\).*/\1/g'`" ;
elif test -d $srcdir/happy; then
   HappyCmd=$hardtop/happy/src/happy-inplace;
   fptools_cv_happy_version=`grep '^ProjectVersion[ 	]*=' $srcdir/happy/mk/version.mk | sed 's/.*\([0-9][0-9]*\.[0-9][0-9]*\).*/\1/g'`;
   echo -n "using happy from the source tree... ";
else
   fptools_cv_happy_version="";
fi;
if expr "$fptools_cv_happy_version" "<" 0.6 > /dev/null 2>&1; then
   if test -d $srcdir/ghc; then
     echo
     echo "Happy version 1.6 or later is required to compile GHC."
     exit 1;
   fi
fi;

fi

echo "$ac_t""$fptools_cv_happy_version" 1>&6
HappyVersion=$fptools_cv_happy_version;


fi;



echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
echo "configure:2291: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2296 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2304: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  ac_cv_header_stdc=yes
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

if test $ac_cv_header_stdc = yes; then
  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 2321 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "memchr" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 2339 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "free" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then
  :
else
  cat > conftest.$ac_ext <<EOF
#line 2360 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int main () { int i; for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }

EOF
if { (eval echo configure:2371: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_header_stdc=no
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_header_stdc" 1>&6
if test $ac_cv_header_stdc = yes; then
  cat >> confdefs.h <<\EOF
#define STDC_HEADERS 1
EOF

fi


for ac_hdr in Files.h assert.h console.h ctype.h dirent.h errno.h fcntl.h float.h ftw.h grp.h ieee754.h malloc.h memory.h nlist.h pascal.h pwd.h sgtty.h siginfo.h signal.h stat.h stdint.h stdlib.h stdarg.h string.h sys/fault.h sys/file.h sys/ioctl.h sys/limits.h sys/mman.h sys/param.h sys/procfs.h sys/resource.h sys/signal.h sys/socket.h netinet/tcp.h sys/stat.h sys/syscall.h sys/time.h sys/timeb.h sys/timers.h sys/times.h sys/types.h sys/utsname.h sys/vadvise.h sys/wait.h termio.h termios.h time.h types.h unistd.h utime.h values.h vfork.h readline/readline.h readline/history.h bfd.h winsock.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:2399: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2404 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2409: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


for ac_hdr in dos.h conio.h io.h std.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:2440: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2445 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2450: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done
 

for ac_hdr in windows.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:2481: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2486 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2491: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
echo "configure:2519: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2524 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
#include <time.h>
int main() {
struct tm *tp;
; return 0; }
EOF
if { (eval echo configure:2533: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_header_time=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_header_time=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_header_time" 1>&6
if test $ac_cv_header_time = yes; then
  cat >> confdefs.h <<\EOF
#define TIME_WITH_SYS_TIME 1
EOF

fi


for ac_hdr in dlfcn.h dl.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:2558: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2563 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2568: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done
 

ac_safe=`echo "alloc.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for alloc.h""... $ac_c" 1>&6
echo "configure:2597: checking for alloc.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2602 "configure"
#include "confdefs.h"
#include <alloc.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2607: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  for ac_func in farcalloc
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2626: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2631 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

else
  echo "$ac_t""no" 1>&6
fi


ac_safe=`echo "malloc.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for malloc.h""... $ac_c" 1>&6
echo "configure:2685: checking for malloc.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2690 "configure"
#include "confdefs.h"
#include <malloc.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2695: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  for ac_func in valloc
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2714: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2719 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2742: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

else
  echo "$ac_t""no" 1>&6
fi


echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
echo "configure:2772: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2777 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
int main() {
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
if { (eval echo configure:2785: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_struct_tm=time.h
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_struct_tm=sys/time.h
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_struct_tm" 1>&6
if test $ac_cv_struct_tm = sys/time.h; then
  cat >> confdefs.h <<\EOF
#define TM_IN_SYS_TIME 1
EOF

fi

echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6
echo "configure:2806: checking for tm_zone in struct tm" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2811 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_cv_struct_tm>
int main() {
struct tm tm; tm.tm_zone;
; return 0; }
EOF
if { (eval echo configure:2819: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_struct_tm_zone=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_struct_tm_zone=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_struct_tm_zone" 1>&6
if test "$ac_cv_struct_tm_zone" = yes; then
  cat >> confdefs.h <<\EOF
#define HAVE_TM_ZONE 1
EOF

else
  echo $ac_n "checking for tzname""... $ac_c" 1>&6
echo "configure:2839: checking for tzname" >&5
if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2844 "configure"
#include "confdefs.h"
#include <time.h>
#ifndef tzname /* For SGI.  */
extern char *tzname[]; /* RS6000 and others reject char **tzname.  */
#endif
int main() {
atoi(*tzname);
; return 0; }
EOF
if { (eval echo configure:2854: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_var_tzname=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_var_tzname=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_var_tzname" 1>&6
  if test $ac_cv_var_tzname = yes; then
    cat >> confdefs.h <<\EOF
#define HAVE_TZNAME 1
EOF

  fi
fi


echo $ac_n "checking timezone""... $ac_c" 1>&6
echo "configure:2877: checking timezone" >&5
if eval "test \"`echo '$''{'fptools_cv_have_timezone'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2882 "configure"
#include "confdefs.h"
#if TIME_WITH_SYS_TIME
# include <sys/time.h>
# include <time.h>
#else
# if HAVE_SYS_TIME_H
#  include <sys/time.h>
# else
#  include <time.h>
# endif
#endif

int main() {
return timezone;
; return 0; }
EOF
if { (eval echo configure:2899: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  fptools_cv_have_timezone=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  fptools_cv_have_timezone=no
fi
rm -f conftest*
fi

echo "$ac_t""$fptools_cv_have_timezone" 1>&6
if test "$fptools_cv_have_timezone" = yes; then
  cat >> confdefs.h <<\EOF
#define HAVE_TIMEZONE 1
EOF

fi

echo $ac_n "checking type of timezone""... $ac_c" 1>&6
echo "configure:2920: checking type of timezone" >&5
if eval "test \"`echo '$''{'fptools_cv_type_timezone'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2925 "configure"
#include "confdefs.h"
#if TIME_WITH_SYS_TIME
# include <sys/time.h>
# include <time.h>
#else
# if HAVE_SYS_TIME_H
#  include <sys/time.h>
# else
#  include <time.h>
# endif
#endif

extern time_t timezone;	

int main() {
int i;
; return 0; }
EOF
if { (eval echo configure:2944: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  fptools_cv_type_timezone=time_t
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  fptools_cv_type_timezone=long
fi
rm -f conftest*
fi

echo "$ac_t""$fptools_cv_type_timezone" 1>&6
cat >> confdefs.h <<EOF
#define TYPE_TIMEZONE $fptools_cv_type_timezone
EOF



echo $ac_n "checking altzone""... $ac_c" 1>&6
echo "configure:2964: checking altzone" >&5
if eval "test \"`echo '$''{'fptools_cv_altzone'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2969 "configure"
#include "confdefs.h"
#if TIME_WITH_SYS_TIME
# include <sys/time.h>
# include <time.h>
#else
# if HAVE_SYS_TIME_H
#  include <sys/time.h>
# else
#  include <time.h>
# endif
#endif

int main() {
return altzone;
; return 0; }
EOF
if { (eval echo configure:2986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  fptools_cv_altzone=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  fptools_cv_altzone=no
fi
rm -f conftest*
fi

echo "$ac_t""$fptools_cv_altzone" 1>&6
if test "$fptools_cv_altzone" = yes; then
  cat >> confdefs.h <<\EOF
#define HAVE_ALTZONE 1
EOF

fi


echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6
echo "configure:3008: checking for st_blksize in struct stat" >&5
if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3013 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
int main() {
struct stat s; s.st_blksize;
; return 0; }
EOF
if { (eval echo configure:3021: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_struct_st_blksize=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_struct_st_blksize=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_struct_st_blksize" 1>&6
if test $ac_cv_struct_st_blksize = yes; then
  cat >> confdefs.h <<\EOF
#define HAVE_ST_BLKSIZE 1
EOF

fi




echo $ac_n "checking whether ${CC} supports long long types""... $ac_c" 1>&6
echo "configure:3045: checking whether ${CC} supports long long types" >&5
if eval "test \"`echo '$''{'fptools_cv_have_long_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext <<EOF
#line 3059 "configure"
#include "confdefs.h"

int main() {
long long a;
; return 0; }
EOF
if { (eval echo configure:3066: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  fptools_cv_have_long_long=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  fptools_cv_have_long_long=no
fi
rm -f conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross


fi

echo "$ac_t""$fptools_cv_have_long_long" 1>&6
if test "$fptools_cv_have_long_long" = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_LONG_LONG 1
EOF

fi


echo $ac_n "checking size of char""... $ac_c" 1>&6
echo "configure:3096: checking size of char" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_char=1
else
  cat > conftest.$ac_ext <<EOF
#line 3104 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(char));
  exit(0);
}
EOF
if { (eval echo configure:3115: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_char=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_char=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_char" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_CHAR $ac_cv_sizeof_char
EOF


echo $ac_n "checking size of double""... $ac_c" 1>&6
echo "configure:3135: checking size of double" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_double'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_double=8
else
  cat > conftest.$ac_ext <<EOF
#line 3143 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(double));
  exit(0);
}
EOF
if { (eval echo configure:3154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_double=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_double=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_double" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_DOUBLE $ac_cv_sizeof_double
EOF


echo $ac_n "checking size of float""... $ac_c" 1>&6
echo "configure:3174: checking size of float" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_float'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_float=4
else
  cat > conftest.$ac_ext <<EOF
#line 3182 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(float));
  exit(0);
}
EOF
if { (eval echo configure:3193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_float=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_float=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_float" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_FLOAT $ac_cv_sizeof_float
EOF


echo $ac_n "checking size of int""... $ac_c" 1>&6
echo "configure:3213: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_int=4
else
  cat > conftest.$ac_ext <<EOF
#line 3221 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(int));
  exit(0);
}
EOF
if { (eval echo configure:3232: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_int=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_int=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_int" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_INT $ac_cv_sizeof_int
EOF


echo $ac_n "checking size of long""... $ac_c" 1>&6
echo "configure:3252: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_long=4
else
  cat > conftest.$ac_ext <<EOF
#line 3260 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(long));
  exit(0);
}
EOF
if { (eval echo configure:3271: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_long=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_long" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_LONG $ac_cv_sizeof_long
EOF


if test "$fptools_cv_have_long_long" = yes; then
echo $ac_n "checking size of long long""... $ac_c" 1>&6
echo "configure:3292: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_long_long=8
else
  cat > conftest.$ac_ext <<EOF
#line 3300 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(long long));
  exit(0);
}
EOF
if { (eval echo configure:3311: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_long_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_long_long=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
EOF


fi
echo $ac_n "checking size of short""... $ac_c" 1>&6
echo "configure:3332: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_short=2
else
  cat > conftest.$ac_ext <<EOF
#line 3340 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(short));
  exit(0);
}
EOF
if { (eval echo configure:3351: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_short=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_short=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_short" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_SHORT $ac_cv_sizeof_short
EOF


echo $ac_n "checking size of unsigned char""... $ac_c" 1>&6
echo "configure:3371: checking size of unsigned char" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_char'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_unsigned_char=1
else
  cat > conftest.$ac_ext <<EOF
#line 3379 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(unsigned char));
  exit(0);
}
EOF
if { (eval echo configure:3390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_unsigned_char=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_unsigned_char=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_unsigned_char" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_UNSIGNED_CHAR $ac_cv_sizeof_unsigned_char
EOF


echo $ac_n "checking size of unsigned int""... $ac_c" 1>&6
echo "configure:3410: checking size of unsigned int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_int'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_unsigned_int=4
else
  cat > conftest.$ac_ext <<EOF
#line 3418 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(unsigned int));
  exit(0);
}
EOF
if { (eval echo configure:3429: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_unsigned_int=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_unsigned_int=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_unsigned_int" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_UNSIGNED_INT $ac_cv_sizeof_unsigned_int
EOF


echo $ac_n "checking size of unsigned long""... $ac_c" 1>&6
echo "configure:3449: checking size of unsigned long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_unsigned_long=4
else
  cat > conftest.$ac_ext <<EOF
#line 3457 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(unsigned long));
  exit(0);
}
EOF
if { (eval echo configure:3468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_unsigned_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_unsigned_long=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_unsigned_long" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_UNSIGNED_LONG $ac_cv_sizeof_unsigned_long
EOF


if test "$fptools_cv_have_long_long" = yes; then
echo $ac_n "checking size of unsigned long long""... $ac_c" 1>&6
echo "configure:3489: checking size of unsigned long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_long_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_unsigned_long_long=8
else
  cat > conftest.$ac_ext <<EOF
#line 3497 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(unsigned long long));
  exit(0);
}
EOF
if { (eval echo configure:3508: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_unsigned_long_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_unsigned_long_long=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_unsigned_long_long" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_UNSIGNED_LONG_LONG $ac_cv_sizeof_unsigned_long_long
EOF


fi
echo $ac_n "checking size of unsigned short""... $ac_c" 1>&6
echo "configure:3529: checking size of unsigned short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_short'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_unsigned_short=2
else
  cat > conftest.$ac_ext <<EOF
#line 3537 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(unsigned short));
  exit(0);
}
EOF
if { (eval echo configure:3548: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_unsigned_short=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_unsigned_short=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_unsigned_short" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_UNSIGNED_SHORT $ac_cv_sizeof_unsigned_short
EOF


echo $ac_n "checking size of void *""... $ac_c" 1>&6
echo "configure:3568: checking size of void *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_void_p=4
else
  cat > conftest.$ac_ext <<EOF
#line 3576 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(void *));
  exit(0);
}
EOF
if { (eval echo configure:3587: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_void_p=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_void_p=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_void_p" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
EOF



echo $ac_n "checking alignment of char""... $ac_c" 1>&6
echo "configure:3608: checking alignment of char" >&5
if eval "test \"`echo '$''{'ac_cv_alignment_char'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_alignment_char=$ac_cv_sizeof_char
else
  cat > conftest.$ac_ext <<EOF
#line 3616 "configure"
#include "confdefs.h"

#include <stdio.h>
#if HAVE_STDDEF_H
#include <stddef.h>
#endif
#ifndef offsetof
#define offsetof(ty,field) ((size_t)((char *)&((ty *)0)->field - (char *)(ty *)0))
#endif
int
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", offsetof(struct { char c; char ty;},ty));
  exit(0);
}
EOF
if { (eval echo configure:3635: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_alignment_char=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_alignment_char=$ac_cv_sizeof_char
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_alignment_char" 1>&6
cat >> confdefs.h <<EOF
#define ALIGNMENT_CHAR $ac_cv_alignment_char
EOF



echo $ac_n "checking alignment of double""... $ac_c" 1>&6
echo "configure:3657: checking alignment of double" >&5
if eval "test \"`echo '$''{'ac_cv_alignment_double'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_alignment_double=$ac_cv_sizeof_double
else
  cat > conftest.$ac_ext <<EOF
#line 3665 "configure"
#include "confdefs.h"

#include <stdio.h>
#if HAVE_STDDEF_H
#include <stddef.h>
#endif
#ifndef offsetof
#define offsetof(ty,field) ((size_t)((char *)&((ty *)0)->field - (char *)(ty *)0))
#endif
int
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", offsetof(struct { char c; double ty;},ty));
  exit(0);
}
EOF
if { (eval echo configure:3684: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_alignment_double=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_alignment_double=$ac_cv_sizeof_double
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_alignment_double" 1>&6
cat >> confdefs.h <<EOF
#define ALIGNMENT_DOUBLE $ac_cv_alignment_double
EOF



echo $ac_n "checking alignment of float""... $ac_c" 1>&6
echo "configure:3706: checking alignment of float" >&5
if eval "test \"`echo '$''{'ac_cv_alignment_float'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_alignment_float=$ac_cv_sizeof_float
else
  cat > conftest.$ac_ext <<EOF
#line 3714 "configure"
#include "confdefs.h"

#include <stdio.h>
#if HAVE_STDDEF_H
#include <stddef.h>
#endif
#ifndef offsetof
#define offsetof(ty,field) ((size_t)((char *)&((ty *)0)->field - (char *)(ty *)0))
#endif
int
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", offsetof(struct { char c; float ty;},ty));
  exit(0);
}
EOF
if { (eval echo configure:3733: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_alignment_float=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_alignment_float=$ac_cv_sizeof_float
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_alignment_float" 1>&6
cat >> confdefs.h <<EOF
#define ALIGNMENT_FLOAT $ac_cv_alignment_float
EOF



echo $ac_n "checking alignment of int""... $ac_c" 1>&6
echo "configure:3755: checking alignment of int" >&5
if eval "test \"`echo '$''{'ac_cv_alignment_int'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_alignment_int=$ac_cv_sizeof_int
else
  cat > conftest.$ac_ext <<EOF
#line 3763 "configure"
#include "confdefs.h"

#include <stdio.h>
#if HAVE_STDDEF_H
#include <stddef.h>
#endif
#ifndef offsetof
#define offsetof(ty,field) ((size_t)((char *)&((ty *)0)->field - (char *)(ty *)0))
#endif
int
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", offsetof(struct { char c; int ty;},ty));
  exit(0);
}
EOF
if { (eval echo configure:3782: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_alignment_int=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_alignment_int=$ac_cv_sizeof_int
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_alignment_int" 1>&6
cat >> confdefs.h <<EOF
#define ALIGNMENT_INT $ac_cv_alignment_int
EOF



echo $ac_n "checking alignment of long""... $ac_c" 1>&6
echo "configure:3804: checking alignment of long" >&5
if eval "test \"`echo '$''{'ac_cv_alignment_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_alignment_long=$ac_cv_sizeof_long
else
  cat > conftest.$ac_ext <<EOF
#line 3812 "configure"
#include "confdefs.h"

#include <stdio.h>
#if HAVE_STDDEF_H
#include <stddef.h>
#endif
#ifndef offsetof
#define offsetof(ty,field) ((size_t)((char *)&((ty *)0)->field - (char *)(ty *)0))
#endif
int
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", offsetof(struct { char c; long ty;},ty));
  exit(0);
}
EOF
if { (eval echo configure:3831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_alignment_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_alignment_long=$ac_cv_sizeof_long
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_alignment_long" 1>&6
cat >> confdefs.h <<EOF
#define ALIGNMENT_LONG $ac_cv_alignment_long
EOF



if test "$fptools_cv_have_long_long" = yes; then
echo $ac_n "checking alignment of long long""... $ac_c" 1>&6
echo "configure:3854: checking alignment of long long" >&5
if eval "test \"`echo '$''{'ac_cv_alignment_long_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_alignment_long_long=$ac_cv_sizeof_long_long
else
  cat > conftest.$ac_ext <<EOF
#line 3862 "configure"
#include "confdefs.h"

#include <stdio.h>
#if HAVE_STDDEF_H
#include <stddef.h>
#endif
#ifndef offsetof
#define offsetof(ty,field) ((size_t)((char *)&((ty *)0)->field - (char *)(ty *)0))
#endif
int
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", offsetof(struct { char c; long long ty;},ty));
  exit(0);
}
EOF
if { (eval echo configure:3881: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_alignment_long_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_alignment_long_long=$ac_cv_sizeof_long_long
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_alignment_long_long" 1>&6
cat >> confdefs.h <<EOF
#define ALIGNMENT_LONG_LONG $ac_cv_alignment_long_long
EOF



fi
echo $ac_n "checking alignment of short""... $ac_c" 1>&6
echo "configure:3904: checking alignment of short" >&5
if eval "test \"`echo '$''{'ac_cv_alignment_short'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_alignment_short=$ac_cv_sizeof_short
else
  cat > conftest.$ac_ext <<EOF
#line 3912 "configure"
#include "confdefs.h"

#include <stdio.h>
#if HAVE_STDDEF_H
#include <stddef.h>
#endif
#ifndef offsetof
#define offsetof(ty,field) ((size_t)((char *)&((ty *)0)->field - (char *)(ty *)0))
#endif
int
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", offsetof(struct { char c; short ty;},ty));
  exit(0);
}
EOF
if { (eval echo configure:3931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_alignment_short=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_alignment_short=$ac_cv_sizeof_short
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_alignment_short" 1>&6
cat >> confdefs.h <<EOF
#define ALIGNMENT_SHORT $ac_cv_alignment_short
EOF



echo $ac_n "checking alignment of unsigned char""... $ac_c" 1>&6
echo "configure:3953: checking alignment of unsigned char" >&5
if eval "test \"`echo '$''{'ac_cv_alignment_unsigned_char'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_alignment_unsigned_char=$ac_cv_sizeof_unsigned_char
else
  cat > conftest.$ac_ext <<EOF
#line 3961 "configure"
#include "confdefs.h"

#include <stdio.h>
#if HAVE_STDDEF_H
#include <stddef.h>
#endif
#ifndef offsetof
#define offsetof(ty,field) ((size_t)((char *)&((ty *)0)->field - (char *)(ty *)0))
#endif
int
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", offsetof(struct { char c; unsigned char ty;},ty));
  exit(0);
}
EOF
if { (eval echo configure:3980: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_alignment_unsigned_char=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_alignment_unsigned_char=$ac_cv_sizeof_unsigned_char
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_alignment_unsigned_char" 1>&6
cat >> confdefs.h <<EOF
#define ALIGNMENT_UNSIGNED_CHAR $ac_cv_alignment_unsigned_char
EOF



echo $ac_n "checking alignment of unsigned int""... $ac_c" 1>&6
echo "configure:4002: checking alignment of unsigned int" >&5
if eval "test \"`echo '$''{'ac_cv_alignment_unsigned_int'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_alignment_unsigned_int=$ac_cv_sizeof_unsigned_int
else
  cat > conftest.$ac_ext <<EOF
#line 4010 "configure"
#include "confdefs.h"

#include <stdio.h>
#if HAVE_STDDEF_H
#include <stddef.h>
#endif
#ifndef offsetof
#define offsetof(ty,field) ((size_t)((char *)&((ty *)0)->field - (char *)(ty *)0))
#endif
int
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", offsetof(struct { char c; unsigned int ty;},ty));
  exit(0);
}
EOF
if { (eval echo configure:4029: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_alignment_unsigned_int=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_alignment_unsigned_int=$ac_cv_sizeof_unsigned_int
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_alignment_unsigned_int" 1>&6
cat >> confdefs.h <<EOF
#define ALIGNMENT_UNSIGNED_INT $ac_cv_alignment_unsigned_int
EOF



echo $ac_n "checking alignment of unsigned long""... $ac_c" 1>&6
echo "configure:4051: checking alignment of unsigned long" >&5
if eval "test \"`echo '$''{'ac_cv_alignment_unsigned_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_alignment_unsigned_long=$ac_cv_sizeof_unsigned_long
else
  cat > conftest.$ac_ext <<EOF
#line 4059 "configure"
#include "confdefs.h"

#include <stdio.h>
#if HAVE_STDDEF_H
#include <stddef.h>
#endif
#ifndef offsetof
#define offsetof(ty,field) ((size_t)((char *)&((ty *)0)->field - (char *)(ty *)0))
#endif
int
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", offsetof(struct { char c; unsigned long ty;},ty));
  exit(0);
}
EOF
if { (eval echo configure:4078: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_alignment_unsigned_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_alignment_unsigned_long=$ac_cv_sizeof_unsigned_long
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_alignment_unsigned_long" 1>&6
cat >> confdefs.h <<EOF
#define ALIGNMENT_UNSIGNED_LONG $ac_cv_alignment_unsigned_long
EOF



if test "$fptools_cv_have_long_long" = yes; then
echo $ac_n "checking alignment of unsigned long long""... $ac_c" 1>&6
echo "configure:4101: checking alignment of unsigned long long" >&5
if eval "test \"`echo '$''{'ac_cv_alignment_unsigned_long_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_alignment_unsigned_long_long=$ac_cv_sizeof_unsigned_long_long
else
  cat > conftest.$ac_ext <<EOF
#line 4109 "configure"
#include "confdefs.h"

#include <stdio.h>
#if HAVE_STDDEF_H
#include <stddef.h>
#endif
#ifndef offsetof
#define offsetof(ty,field) ((size_t)((char *)&((ty *)0)->field - (char *)(ty *)0))
#endif
int
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", offsetof(struct { char c; unsigned long long ty;},ty));
  exit(0);
}
EOF
if { (eval echo configure:4128: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_alignment_unsigned_long_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_alignment_unsigned_long_long=$ac_cv_sizeof_unsigned_long_long
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_alignment_unsigned_long_long" 1>&6
cat >> confdefs.h <<EOF
#define ALIGNMENT_UNSIGNED_LONG_LONG $ac_cv_alignment_unsigned_long_long
EOF



fi
echo $ac_n "checking alignment of unsigned short""... $ac_c" 1>&6
echo "configure:4151: checking alignment of unsigned short" >&5
if eval "test \"`echo '$''{'ac_cv_alignment_unsigned_short'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_alignment_unsigned_short=$ac_cv_sizeof_unsigned_short
else
  cat > conftest.$ac_ext <<EOF
#line 4159 "configure"
#include "confdefs.h"

#include <stdio.h>
#if HAVE_STDDEF_H
#include <stddef.h>
#endif
#ifndef offsetof
#define offsetof(ty,field) ((size_t)((char *)&((ty *)0)->field - (char *)(ty *)0))
#endif
int
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", offsetof(struct { char c; unsigned short ty;},ty));
  exit(0);
}
EOF
if { (eval echo configure:4178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_alignment_unsigned_short=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_alignment_unsigned_short=$ac_cv_sizeof_unsigned_short
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_alignment_unsigned_short" 1>&6
cat >> confdefs.h <<EOF
#define ALIGNMENT_UNSIGNED_SHORT $ac_cv_alignment_unsigned_short
EOF



echo $ac_n "checking alignment of void *""... $ac_c" 1>&6
echo "configure:4200: checking alignment of void *" >&5
if eval "test \"`echo '$''{'ac_cv_alignment_void_p'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_alignment_void_p=$ac_cv_sizeof_void_p
else
  cat > conftest.$ac_ext <<EOF
#line 4208 "configure"
#include "confdefs.h"

#include <stdio.h>
#if HAVE_STDDEF_H
#include <stddef.h>
#endif
#ifndef offsetof
#define offsetof(ty,field) ((size_t)((char *)&((ty *)0)->field - (char *)(ty *)0))
#endif
int
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", offsetof(struct { char c; void * ty;},ty));
  exit(0);
}
EOF
if { (eval echo configure:4227: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_alignment_void_p=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_alignment_void_p=$ac_cv_sizeof_void_p
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_alignment_void_p" 1>&6
cat >> confdefs.h <<EOF
#define ALIGNMENT_VOID_P $ac_cv_alignment_void_p
EOF






echo $ac_n "checking whether we can open files in binary mode""... $ac_c" 1>&6
echo "configure:4252: checking whether we can open files in binary mode" >&5
if eval "test \"`echo '$''{'fptools_cv_have_o_binary'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext <<EOF
#line 4266 "configure"
#include "confdefs.h"

int main() {
#ifdef HAVE_FCNTL_H
#include <fcntl.h>
#endif
int x = O_BINARY;
; return 0; }
EOF
if { (eval echo configure:4276: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  fptools_cv_have_o_binary=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  fptools_cv_have_o_binary=no
fi
rm -f conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross


fi

echo "$ac_t""$fptools_cv_have_o_binary" 1>&6
if test "$fptools_cv_have_o_binary" = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_O_BINARY 1
EOF

fi




ac_save_LIBS="$LIBS"
LIBS=;
cat > conftest.$ac_ext <<EOF
#line 4310 "configure"
#include "confdefs.h"

#if HAVE_WINDOWS_H
#include <windows.h>
#endif
main() { 
  WinExec("",0);
  exit(0);
}

int t() { return 0; }
EOF
if { (eval echo configure:4323: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
  
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    have_winexec=1
  else
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    have_winexec=0
fi
rm -f conftest*


if test "$have_winexec" = "1"; then
cat >> confdefs.h <<\EOF
#define HAVE_WINEXEC 1
EOF

fi


ac_save_LIBS="$LIBS"
LIBS=;
cat > conftest.$ac_ext <<EOF
#line 4347 "configure"
#include "confdefs.h"

#if HAVE_WINDOWS_H
#include <windows.h>
#endif
main() { 
  char* dir;
  GetModuleFileName((HMODULE)0,dir,0);
  exit(0);
}

int t() { return 0; }
EOF
if { (eval echo configure:4361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
  
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    have_getmodulefilename=1
  else
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    have_getmodulefilename=0
fi
rm -f conftest*


if test "$have_getmodulefilename" = "1"; then
cat >> confdefs.h <<\EOF
#define HAVE_GETMODULEFILENAME 1
EOF

fi


echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
echo "configure:4383: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4388 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
#ifdef signal
#undef signal
#endif
#ifdef __cplusplus
extern "C" void (*signal (int, void (*)(int)))(int);
#else
void (*signal ()) ();
#endif

int main() {
int i;
; return 0; }
EOF
if { (eval echo configure:4405: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_type_signal=void
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_type_signal=int
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_type_signal" 1>&6
cat >> confdefs.h <<EOF
#define RETSIGTYPE $ac_cv_type_signal
EOF


if test "$ac_cv_type_signal" = void; then
cat >> confdefs.h <<\EOF
#define VOID_INT_SIGNALS 1
EOF

fi

for ac_func in strcasecmp _stricmp stricmp strcmpi
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4433: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4438 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:4461: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_func in strcmp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4488: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4493 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:4516: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_func in realpath _fullpath
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4543: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4548 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:4571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done
  
for ac_func in PBHSetVolSync macsystem
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4598: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4603 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:4626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done
  
for ac_func in fgetpos fsetpos fseek ftell
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4653: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4658 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:4681: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_func in vsnprintf _vsnprintf
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4708: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4713 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:4736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_func in snprintf  _snprintf 
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4763: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4768 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:4791: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done
  
for ac_func in popen     _popen 
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4818: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4823 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:4846: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done
  
for ac_func in pclose    _pclose 
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4873: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4878 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:4901: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done
  


for ac_func in access ftime getclock getpagesize getrusage gettimeofday mktime mprotect readlink setitimer stat symlink sysconf timelocal times vadvise vfork
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4930: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4935 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:4958: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


echo $ac_n "checking for mpz_fdiv_qr in -lgmp""... $ac_c" 1>&6
echo "configure:4984: checking for mpz_fdiv_qr in -lgmp" >&5
ac_lib_var=`echo gmp'_'mpz_fdiv_qr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lgmp  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4992 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char mpz_fdiv_qr();

int main() {
mpz_fdiv_qr()
; return 0; }
EOF
if { (eval echo configure:5003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  HaveLibGmp=YES; LibGmp=gmp
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for mpz_fdiv_qr in -lgmp2""... $ac_c" 1>&6
echo "configure:5022: checking for mpz_fdiv_qr in -lgmp2" >&5
ac_lib_var=`echo gmp2'_'mpz_fdiv_qr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lgmp2  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5030 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char mpz_fdiv_qr();

int main() {
mpz_fdiv_qr()
; return 0; }
EOF
if { (eval echo configure:5041: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  HaveLibGmp=YES; LibGmp=gmp2
else
  echo "$ac_t""no" 1>&6
HaveLibGmp=No; LibGmp=not-installed
fi

fi




echo $ac_n "checking for xmalloc in -liberty""... $ac_c" 1>&6
echo "configure:5068: checking for xmalloc in -liberty" >&5
ac_lib_var=`echo iberty'_'xmalloc | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-liberty  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5076 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char xmalloc();

int main() {
xmalloc()
; return 0; }
EOF
if { (eval echo configure:5087: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_lib=HAVE_LIB`echo iberty | sed -e 's/[^a-zA-Z0-9_]/_/g' \
    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF

  LIBS="-liberty $LIBS"

else
  echo "$ac_t""no" 1>&6
fi

echo $ac_n "checking for bfd_init in -lbfd""... $ac_c" 1>&6
echo "configure:5115: checking for bfd_init in -lbfd" >&5
ac_lib_var=`echo bfd'_'bfd_init | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lbfd  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5123 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char bfd_init();

int main() {
bfd_init()
; return 0; }
EOF
if { (eval echo configure:5134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_lib=HAVE_LIB`echo bfd | sed -e 's/[^a-zA-Z0-9_]/_/g' \
    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF

  LIBS="-lbfd $LIBS"

else
  echo "$ac_t""no" 1>&6
fi



echo $ac_n "checking for library containing tputs""... $ac_c" 1>&6
echo "configure:5164: checking for library containing tputs" >&5
if eval "test \"`echo '$''{'ac_cv_search_tputs'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_func_search_save_LIBS="$LIBS"
ac_cv_search_tputs="no"
cat > conftest.$ac_ext <<EOF
#line 5171 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char tputs();

int main() {
tputs()
; return 0; }
EOF
if { (eval echo configure:5182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_search_tputs="none required"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
test "$ac_cv_search_tputs" = "no" && for i in ncurses termcap; do
LIBS="-l$i  $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
#line 5193 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char tputs();

int main() {
tputs()
; return 0; }
EOF
if { (eval echo configure:5204: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_search_tputs="-l$i"
break
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
done
LIBS="$ac_func_search_save_LIBS"
fi

echo "$ac_t""$ac_cv_search_tputs" 1>&6
if test "$ac_cv_search_tputs" != "no"; then
  test "$ac_cv_search_tputs" = "none required" || LIBS="$ac_cv_search_tputs $LIBS"
  
else :
  
fi

echo $ac_n "checking for readline in -lreadline""... $ac_c" 1>&6
echo "configure:5226: checking for readline in -lreadline" >&5
ac_lib_var=`echo readline'_'readline | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lreadline  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5234 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char readline();

int main() {
readline()
; return 0; }
EOF
if { (eval echo configure:5245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
cat >> confdefs.h <<\EOF
#define HAVE_LIBREADLINE 1
EOF

HaveLibReadline=YES

else
  echo "$ac_t""no" 1>&6

cat >> confdefs.h <<\EOF
#define HAVE_LIBREADLINE 0
EOF

HaveLibReadline=NO

fi





echo $ac_n "checking for function_dlopen""... $ac_c" 1>&6
echo "configure:5283: checking for function_dlopen" >&5
 if eval "test \"`echo '$''{'ac_cv_flag_function_dlopen'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
ac_save_LIBS="$LIBS"
LIBS="";
cat > conftest.$ac_ext <<EOF
#line 5291 "configure"
#include "confdefs.h"
main() { extern char dlopen(); dlopen();; exit(0); } 
int t() { return 0; }
EOF
if { (eval echo configure:5296: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
  
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    eval "ac_cv_flag_function_dlopen=yes"
  else
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    eval "ac_cv_flag_function_dlopen=no"
   
fi
rm -f conftest*


 
fi

if eval "test \"`echo '$ac_cv_flag_'function_dlopen`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBS=" $LIBS"
    ac_tr_lib=HAVE_LIB`echo dl | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF


else
  echo "$ac_t""no" 1>&6
  echo $ac_n "checking for library_dl""... $ac_c" 1>&6
echo "configure:5325: checking for library_dl" >&5
 if eval "test \"`echo '$''{'ac_cv_flag_library_dl'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
ac_save_LIBS="$LIBS"
LIBS="-ldl";
cat > conftest.$ac_ext <<EOF
#line 5333 "configure"
#include "confdefs.h"
main() { extern char dlopen(); dlopen();; exit(0); } 
int t() { return 0; }
EOF
if { (eval echo configure:5338: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
  
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    eval "ac_cv_flag_library_dl=yes"
  else
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    eval "ac_cv_flag_library_dl=no"
   
fi
rm -f conftest*


 
fi

if eval "test \"`echo '$ac_cv_flag_'library_dl`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBS="-ldl $LIBS"
    ac_tr_lib=HAVE_LIB`echo dl | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF


else
  echo "$ac_t""no" 1>&6
  

fi

fi


echo $ac_n "checking for function_shl_load""... $ac_c" 1>&6
echo "configure:5374: checking for function_shl_load" >&5
 if eval "test \"`echo '$''{'ac_cv_flag_function_shl_load'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
ac_save_LIBS="$LIBS"
LIBS="";
cat > conftest.$ac_ext <<EOF
#line 5382 "configure"
#include "confdefs.h"
main() { extern char shl_load(); shl_load();; exit(0); } 
int t() { return 0; }
EOF
if { (eval echo configure:5387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
  
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    eval "ac_cv_flag_function_shl_load=yes"
  else
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    eval "ac_cv_flag_function_shl_load=no"
   
fi
rm -f conftest*


 
fi

if eval "test \"`echo '$ac_cv_flag_'function_shl_load`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBS=" $LIBS"
    ac_tr_lib=HAVE_LIB`echo dld | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF


else
  echo "$ac_t""no" 1>&6
  echo $ac_n "checking for library_dld""... $ac_c" 1>&6
echo "configure:5416: checking for library_dld" >&5
 if eval "test \"`echo '$''{'ac_cv_flag_library_dld'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
ac_save_LIBS="$LIBS"
LIBS="-ldld";
cat > conftest.$ac_ext <<EOF
#line 5424 "configure"
#include "confdefs.h"
main() { extern char shl_load(); shl_load();; exit(0); } 
int t() { return 0; }
EOF
if { (eval echo configure:5429: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
  
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    eval "ac_cv_flag_library_dld=yes"
  else
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    eval "ac_cv_flag_library_dld=no"
   
fi
rm -f conftest*


 
fi

if eval "test \"`echo '$ac_cv_flag_'library_dld`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBS="-ldld $LIBS"
    ac_tr_lib=HAVE_LIB`echo dld | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF


else
  echo "$ac_t""no" 1>&6
  

fi

fi


echo $ac_n "checking for function_atan""... $ac_c" 1>&6
echo "configure:5465: checking for function_atan" >&5
 if eval "test \"`echo '$''{'ac_cv_flag_function_atan'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
ac_save_LIBS="$LIBS"
LIBS="";
cat > conftest.$ac_ext <<EOF
#line 5473 "configure"
#include "confdefs.h"
main() { extern char atan(); atan();; exit(0); } 
int t() { return 0; }
EOF
if { (eval echo configure:5478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
  
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    eval "ac_cv_flag_function_atan=yes"
  else
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    eval "ac_cv_flag_function_atan=no"
   
fi
rm -f conftest*


 
fi

if eval "test \"`echo '$ac_cv_flag_'function_atan`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBS=" $LIBS"
    ac_tr_lib=HAVE_LIB`echo m | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF


else
  echo "$ac_t""no" 1>&6
  echo $ac_n "checking for library_m""... $ac_c" 1>&6
echo "configure:5507: checking for library_m" >&5
 if eval "test \"`echo '$''{'ac_cv_flag_library_m'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
ac_save_LIBS="$LIBS"
LIBS="-lm";
cat > conftest.$ac_ext <<EOF
#line 5515 "configure"
#include "confdefs.h"
main() { extern char atan(); atan();; exit(0); } 
int t() { return 0; }
EOF
if { (eval echo configure:5520: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
  
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    eval "ac_cv_flag_library_m=yes"
  else
    LIBS="$ac_save_LIBS"
    rm -rf conftest*
    eval "ac_cv_flag_library_m=no"
   
fi
rm -f conftest*


 
fi

if eval "test \"`echo '$ac_cv_flag_'library_m`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBS="-lm $LIBS"
    ac_tr_lib=HAVE_LIB`echo m | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF


else
  echo "$ac_t""no" 1>&6
  

fi

fi




# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments.  Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
echo "configure:5560: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5565 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
if { (eval echo configure:5572: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_header_alloca_h=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_header_alloca_h=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
if test $ac_cv_header_alloca_h = yes; then
  cat >> confdefs.h <<\EOF
#define HAVE_ALLOCA_H 1
EOF

fi

echo $ac_n "checking for alloca""... $ac_c" 1>&6
echo "configure:5593: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5598 "configure"
#include "confdefs.h"

#ifdef __GNUC__
# define alloca __builtin_alloca
#else
# ifdef _MSC_VER
#  include <malloc.h>
#  define alloca _alloca
# else
#  if HAVE_ALLOCA_H
#   include <alloca.h>
#  else
#   ifdef _AIX
 #pragma alloca
#   else
#    ifndef alloca /* predefined by HP cc +Olibcalls */
char *alloca ();
#    endif
#   endif
#  endif
# endif
#endif

int main() {
char *p = (char *) alloca(1);
; return 0; }
EOF
if { (eval echo configure:5626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_func_alloca_works=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_func_alloca_works=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
if test $ac_cv_func_alloca_works = yes; then
  cat >> confdefs.h <<\EOF
#define HAVE_ALLOCA 1
EOF

fi

if test $ac_cv_func_alloca_works = no; then
  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
  # that cause trouble.  Some versions do not even contain alloca or
  # contain a buggy version.  If you still want to use their alloca,
  # use ar to extract alloca.o from them instead of compiling alloca.c.
  ALLOCA=alloca.${ac_objext}
  cat >> confdefs.h <<\EOF
#define C_ALLOCA 1
EOF


echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
echo "configure:5658: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5663 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
#else
wenotbecray
#endif

EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "webecray" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_os_cray=yes
else
  rm -rf conftest*
  ac_cv_os_cray=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_os_cray" 1>&6
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
  echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:5688: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5693 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:5716: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<EOF
#define CRAY_STACKSEG_END $ac_func
EOF

  break
else
  echo "$ac_t""no" 1>&6
fi

done
fi

echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
echo "configure:5743: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_c_stack_direction=0
else
  cat > conftest.$ac_ext <<EOF
#line 5751 "configure"
#include "confdefs.h"
find_stack_direction ()
{
  static char *addr = 0;
  auto char dummy;
  if (addr == 0)
    {
      addr = &dummy;
      return find_stack_direction ();
    }
  else
    return (&dummy > addr) ? 1 : -1;
}
main ()
{
  exit (find_stack_direction() < 0);
}
EOF
if { (eval echo configure:5770: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_c_stack_direction=1
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_c_stack_direction=-1
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
cat >> confdefs.h <<EOF
#define STACK_DIRECTION $ac_cv_c_stack_direction
EOF

fi


echo $ac_n "checking for working const""... $ac_c" 1>&6
echo "configure:5793: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5798 "configure"
#include "confdefs.h"

int main() {

/* Ultrix mips cc rejects this.  */
typedef int charset[2]; const charset x;
/* SunOS 4.1.1 cc rejects this.  */
char const *const *ccp;
char **p;
/* NEC SVR4.0.2 mips cc rejects this.  */
struct point {int x, y;};
static struct point const zero = {0,0};
/* AIX XL C 1.02.0.0 rejects this.
   It does not let you subtract one const X* pointer from another in an arm
   of an if-expression whose if-part is not a constant expression */
const char *g = "string";
ccp = &g + (g ? g-g : 0);
/* HPUX 7.0 cc rejects these. */
++ccp;
p = (char**) ccp;
ccp = (char const *const *) p;
{ /* SCO 3.2v4 cc rejects this.  */
  char *t;
  char const *s = 0 ? (char *) 0 : (char const *) 0;

  *t++ = 0;
}
{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
  int x[] = {25, 17};
  const int *foo = &x[0];
  ++foo;
}
{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
  typedef const int *iptr;
  iptr p = 0;
  ++p;
}
{ /* AIX XL C 1.02.0.0 rejects this saying
     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
  struct s { int j; const int *ap[3]; };
  struct s *b; b->j = 5;
}
{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
  const int foo = 10;
}

; return 0; }
EOF
if { (eval echo configure:5847: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_c_const=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_c_const=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_c_const" 1>&6
if test $ac_cv_c_const = no; then
  cat >> confdefs.h <<\EOF
#define const 
EOF

fi


echo $ac_n "checking prototypes""... $ac_c" 1>&6
echo "configure:5869: checking prototypes" >&5
if eval "test \"`echo '$''{'ac_cv_prototypes'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5874 "configure"
#include "confdefs.h"

void foo(int);
void foo(i)
int i; { 
return;
}

int main() {
int i;
; return 0; }
EOF
if { (eval echo configure:5887: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_prototypes=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_prototypes=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_prototypes" 1>&6
if test "$ac_cv_prototypes" = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_PROTOTYPES 1
EOF

fi
          

echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
echo "configure:5909: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
#line 5916 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {

#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
 bogus endian macros
#endif
; return 0; }
EOF
if { (eval echo configure:5927: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  # It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
#line 5931 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {

#if BYTE_ORDER != BIG_ENDIAN
 not big endian
#endif
; return 0; }
EOF
if { (eval echo configure:5942: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_c_bigendian=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_c_bigendian=no
fi
rm -f conftest*
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
if test $ac_cv_c_bigendian = unknown; then
if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 5962 "configure"
#include "confdefs.h"
main () {
  /* Are we little or big endian?  From Harbison&Steele.  */
  union
  {
    long l;
    char c[sizeof (long)];
  } u;
  u.l = 1;
  exit (u.c[sizeof (long) - 1] == 1);
}
EOF
if { (eval echo configure:5975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_c_bigendian=no
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_c_bigendian=yes
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_c_bigendian" 1>&6
if test $ac_cv_c_bigendian = yes; then
  cat >> confdefs.h <<\EOF
#define WORDS_BIGENDIAN 1
EOF

fi

# Allay users' general fear of warnings of any kind.


echo $ac_n "checking for nlist in -lelf""... $ac_c" 1>&6
echo "configure:6002: checking for nlist in -lelf" >&5
ac_lib_var=`echo elf'_'nlist | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lelf  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 6010 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char nlist();

int main() {
nlist()
; return 0; }
EOF
if { (eval echo configure:6021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBS="-lelf $LIBS"
else
  echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking leading underscore in symbol names""... $ac_c" 1>&6
echo "configure:6041: checking leading underscore in symbol names" >&5
if eval "test \"`echo '$''{'fptools_cv_lead_uscore'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
case $HostPlatform in
alpha-dec-osf*) fptools_cv_lead_uscore='no';;
*cygwin32) fptools_cv_lead_uscore='yes';;
*mingw32) fptools_cv_lead_uscore='yes';;
*) 
if test "$cross_compiling" = yes; then
  fptools_cv_lead_uscore=NO
else
  cat > conftest.$ac_ext <<EOF
#line 6055 "configure"
#include "confdefs.h"
#ifdef HAVE_NLIST_H
#include <nlist.h>

struct nlist xYzzY1[] = {{"xYzzY1", 0},{0}};
struct nlist xYzzY2[] = {{"_xYzzY2", 0},{0}};
#endif

main(argc, argv)
int argc;
char **argv;
{
#ifdef HAVE_NLIST_H
    if(nlist(argv[0], xYzzY1) == 0 && xYzzY1[0].n_value != 0)
        exit(1);
    if(nlist(argv[0], xYzzY2) == 0 && xYzzY2[0].n_value != 0)
        exit(0);
#endif
    exit(1);
}
EOF
if { (eval echo configure:6077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  fptools_cv_lead_uscore=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  fptools_cv_lead_uscore=no
fi
rm -fr conftest*
fi

;;
esac
fi

echo "$ac_t""$fptools_cv_lead_uscore" 1>&6;
LeadingUnderscore=`echo $fptools_cv_lead_uscore | sed 'y/yesno/YESNO/'`

case $LeadingUnderscore in
YES) cat >> confdefs.h <<\EOF
#define LEADING_UNDERSCORE 1
EOF
;;
esac


echo $ac_n "checking for end of text section marker""... $ac_c" 1>&6
echo "configure:6105: checking for end of text section marker" >&5
not_done=1
for i in data_start _data_start etext _etext __etext; do
  cat > conftest.$ac_ext <<EOF
#line 6109 "configure"
#include "confdefs.h"
extern char* $i;
int main() {
return (int)&$i
; return 0; }
EOF
if { (eval echo configure:6116: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  fptools_end_of_text=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  fptools_end_of_text=no
fi
rm -f conftest*
  if test "$fptools_end_of_text" = yes; then
   if eval "test \"`echo '$''{'fptools_cv_end_of_text_decl'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat >> confdefs.h <<EOF
#define TEXT_SECTION_END_MARKER_DECL $i
EOF

fi

   if eval "test \"`echo '$''{'fptools_cv_end_of_text'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat >> confdefs.h <<EOF
#define TEXT_SECTION_END_MARKER $i
EOF

fi

   not_done=0
   break
  fi
done
if test "$not_done" = 1; then
cat > conftest.$ac_ext <<EOF
#line 6151 "configure"
#include "confdefs.h"
extern char* etext asm("etext");
int main() {
return (int)&etext
; return 0; }
EOF
if { (eval echo configure:6158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  fptools_end_of_text=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  fptools_end_of_text=no
fi
rm -f conftest*;
if test "$fptools_end_of_text" = yes; then
  if eval "test \"`echo '$''{'fptools_cv_end_of_text'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat >> confdefs.h <<EOF
#define TEXT_SECTION_END_MARKER etext
EOF

fi

  if eval "test \"`echo '$''{'fptools_cv_end_of_text_decl'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat >> confdefs.h <<EOF
#define TEXT_SECTION_END_MARKER_DECL etext asm("etext")
EOF

fi

else
  cat >> confdefs.h <<EOF
#define TEXT_SECTION_END_MARKER_DECL dunno_what_it_is
EOF

  cat >> confdefs.h <<EOF
#define TEXT_SECTION_END_MARKER dunno_what_it_is
EOF

fi
fi
echo "$ac_t""$fptools_cv_end_of_text" 1>&6


echo $ac_n "checking for end of data section marker""... $ac_c" 1>&6
echo "configure:6202: checking for end of data section marker" >&5
not_done=1
for i in end _end __end; do
  cat > conftest.$ac_ext <<EOF
#line 6206 "configure"
#include "confdefs.h"
extern char* $i;
int main() {
return (int)&$i
; return 0; }
EOF
if { (eval echo configure:6213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  fptools_end_of_data=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  fptools_end_of_data=no
fi
rm -f conftest*
  if test "$fptools_end_of_data" = yes; then
   if eval "test \"`echo '$''{'fptools_cv_end_of_data_decl'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat >> confdefs.h <<EOF
#define DATA_SECTION_END_MARKER_DECL $i
EOF

fi

   if eval "test \"`echo '$''{'fptools_cv_end_of_data'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat >> confdefs.h <<EOF
#define DATA_SECTION_END_MARKER $i
EOF

fi

   not_done=0
   break
  fi
done
if test "$not_done" = 1; then
cat > conftest.$ac_ext <<EOF
#line 6248 "configure"
#include "confdefs.h"
extern char* end asm("end");
int main() {
return (int)&end
; return 0; }
EOF
if { (eval echo configure:6255: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  fptools_end_of_data=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  fptools_end_of_data=no
fi
rm -f conftest*;
if test "$fptools_end_of_data" = yes; then
  if eval "test \"`echo '$''{'fptools_cv_end_of_data_decl'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat >> confdefs.h <<EOF
#define DATA_SECTION_END_MARKER_DECL end asm("end")
EOF

fi

  if eval "test \"`echo '$''{'fptools_cv_end_of_data'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat >> confdefs.h <<EOF
#define DATA_SECTION_END_MARKER end
EOF

fi

else
  if eval "test \"`echo '$''{'fptools_cv_end_of_data_decl'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat >> confdefs.h <<EOF
#define DATA_SECTION_END_MARKER_DECL dunno_what_it_is
EOF

fi

  if eval "test \"`echo '$''{'fptools_cv_end_of_data'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat >> confdefs.h <<EOF
#define DATA_SECTION_END_MARKER dunno_what_it_is
EOF

fi

fi
fi
echo "$ac_t""$fptools_cv_end_of_data" 1>&6


echo $ac_n "checking if code section appears before data""... $ac_c" 1>&6
echo "configure:6309: checking if code section appears before data" >&5
if eval "test \"`echo '$''{'fptools_cv_code_bef_data'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  false
else
  cat > conftest.$ac_ext <<EOF
#line 6317 "configure"
#include "confdefs.h"

int f() { return 1; }
int i;
int main() { return ((char*)&f > (char*)&i); }


EOF
if { (eval echo configure:6326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  fptools_cv_code_bef_data=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  fptools_cv_code_bef_data=no
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$fptools_cv_code_bef_data" 1>&6
if test "$fptools_cv_code_bef_data" = yes; then
  cat >> confdefs.h <<\EOF
#define CODE_BEFORE_DATA 1
EOF

fi


trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr `echo "mk/config.mk mk/config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@subdirs@%$subdirs%g
s%@hardtop@%$hardtop%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@HostPlatform@%$HostPlatform%g
s%@TargetPlatform@%$TargetPlatform%g
s%@HostPlatform_CPP@%$HostPlatform_CPP%g
s%@HostArch_CPP@%$HostArch_CPP%g
s%@HostOS_CPP@%$HostOS_CPP%g
s%@HostOS_Full@%$HostOS_Full%g
s%@HostVendor_CPP@%$HostVendor_CPP%g
s%@exeext@%$exeext%g
s%@GHC@%$GHC%g
s%@NHC@%$NHC%g
s%@HBC@%$HBC%g
s%@WithHc@%$WithHc%g
s%@WhatGccIsCalled@%$WhatGccIsCalled%g
s%@BootingFromHc@%$BootingFromHc%g
s%@EnableWin32DLLs@%$EnableWin32DLLs%g
s%@PerlCmd@%$PerlCmd%g
s%@BashCmd@%$BashCmd%g
s%@CC@%$CC%g
s%@HaveGcc@%$HaveGcc%g
s%@CPP@%$CPP%g
s%@ContextDiffCmd@%$ContextDiffCmd%g
s%@FindCmd@%$FindCmd%g
s%@YACC@%$YACC%g
s%@WhatCmd@%$WhatCmd%g
s%@YaccCmd@%$YaccCmd%g
s%@LEX@%$LEX%g
s%@LEXLIB@%$LEXLIB%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@ArCmd@%$ArCmd%g
s%@RANLIB@%$RANLIB%g
s%@LN_S@%$LN_S%g
s%@SedCmd@%$SedCmd%g
s%@TimeCmd@%$TimeCmd%g
s%@TarCmd@%$TarCmd%g
s%@CompressCmd@%$CompressCmd%g
s%@CompressSuffix@%$CompressSuffix%g
s%@HappyCmd@%$HappyCmd%g
s%@HappyVersion@%$HappyVersion%g
s%@HaveLibGmp@%$HaveLibGmp%g
s%@LibGmp@%$LibGmp%g
s%@HaveLibReadline@%$HaveLibReadline%g
s%@ALLOCA@%$ALLOCA%g
s%@LeadingUnderscore@%$LeadingUnderscore%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"mk/config.mk"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  [/$]*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_uB='\([ 	]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'

if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
  CONFIG_HEADERS="mk/config.h"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  echo creating $ac_file

  rm -f conftest.frag conftest.in conftest.out
  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  cat $ac_file_inputs > conftest.in

EOF

# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h.  And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF

# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.

rm -f conftest.tail
while :
do
  ac_lines=`grep -c . conftest.vals`
  # grep -c gives empty output for an empty file on some AIX systems.
  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
  # Write a limited-size here document to conftest.frag.
  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
  echo 'CEOF
  sed -f conftest.frag conftest.in > conftest.out
  rm -f conftest.in
  mv conftest.out conftest.in
' >> $CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
  rm -f conftest.vals
  mv conftest.tail conftest.vals
done
rm -f conftest.vals

cat >> $CONFIG_STATUS <<\EOF
  rm -f conftest.frag conftest.h
  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
  cat conftest.in >> conftest.h
  rm -f conftest.in
  if cmp -s $ac_file conftest.h 2>/dev/null; then
    echo "$ac_file is unchanged"
    rm -f conftest.h
  else
    # Remove last slash and all that follows it.  Not all systems have dirname.
      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
      # The file is in a subdirectory.
      test ! -d "$ac_dir" && mkdir "$ac_dir"
    fi
    rm -f $ac_file
    mv conftest.h $ac_file
  fi
fi; done

EOF
cat >> $CONFIG_STATUS <<EOF

EOF
cat >> $CONFIG_STATUS <<\EOF
echo timestamp > mk/stamp-h 
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1

if test "$no_recursion" != yes; then

  # Remove --cache-file and --srcdir arguments so they do not pile up.
  ac_sub_configure_args=
  ac_prev=
  for ac_arg in $ac_configure_args; do
    if test -n "$ac_prev"; then
      ac_prev=
      continue
    fi
    case "$ac_arg" in
    -cache-file | --cache-file | --cache-fil | --cache-fi \
    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
      ac_prev=cache_file ;;
    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
      ;;
    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
      ac_prev=srcdir ;;
    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
      ;;
    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
    esac
  done

  for ac_config_dir in ghc; do

    # Do not complain, so a configure script can configure whichever
    # parts of a large source tree are present.
    if test ! -d $srcdir/$ac_config_dir; then
      continue
    fi

    echo configuring in $ac_config_dir

    case "$srcdir" in
    .) ;;
    *)
      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
      else
        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
      fi
      ;;
    esac

    ac_popdir=`pwd`
    cd $ac_config_dir

      # A "../" for each directory in /$ac_config_dir.
      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`

    case "$srcdir" in
    .) # No --srcdir option.  We are building in place.
      ac_sub_srcdir=$srcdir ;;
    /*) # Absolute path.
      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
    *) # Relative path.
      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
    esac

    # Check for guested configure; otherwise get Cygnus style configure.
    if test -f $ac_sub_srcdir/configure; then
      ac_sub_configure=$ac_sub_srcdir/configure
    elif test -f $ac_sub_srcdir/configure.in; then
      ac_sub_configure=$ac_configure
    else
      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
      ac_sub_configure=
    fi

    # The recursion is here.
    if test -n "$ac_sub_configure"; then

      # Make the cache file name correct relative to the subdirectory.
      case "$cache_file" in
      /*) ac_sub_cache_file=$cache_file ;;
      *) # Relative path.
        ac_sub_cache_file="$ac_dots$cache_file" ;;
      esac
  case "$ac_given_INSTALL" in
        [/$]*) INSTALL="$ac_given_INSTALL" ;;
        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
        esac

      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
      # The eval makes quoting arguments work.
      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
      then :
      else
        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
      fi
    fi

    cd $ac_popdir
  done
fi


echo ''
echo '************************************************'
echo '*** NOW DO: gmake boot followed by gmake all'
echo '***         (where gmake == GNU make)'
echo '************************************************'
exit 0