next up previous contents
Next: The Graphical User Interface Up: The Graphics Program PLAUT04. Previous: Setting up the resource   Contents

Example

In this example, we want to view a CR3BP data set. We want the diagram to show the ``$ x$'' component on the X-axis, ``$ y$'' component on the Y-axis, and ``$ z$'' component on the Z-axis for the solution diagram. In the CR3BP, we use the parameters ``1 2 3 10 21 22 23'' in the AUTO calculations, and we also want to be able to use these to color the diagram, so we set the ``parameter indices''.

Other preferences include

The settings are the settings in the resource file are then as follows:

#  Initialize the default options
Draw Reference Plane  = Yes
Orbit Animation       = No
Satellite Animation   = No 
Draw Primaries        = Yes
Draw Libration Points = Yes
Normalize Data        = No
Draw Background       = No

#  Initialize the default graph type
#  0 --- Solution(fort.8)  1 --- Bifurcation(fort.7)
Graph Type    = 0

# initialize the default graph style
#  0 --- LINES,  1 --- TUBES, 2 ---- SURFACE  3--- nurbs curve
graph Style  =  1

# set X, Y, Z, and Label
# 0 is Time for X,Y,Z. 0 is "All" for Label

Solution X Axis              = 1
Solution Y Axis              = 2
Solution Z Axis              = 3

Labels                       = 0

#set the parameter indices 
parameter ID = 1,  2,  3, 10,  15, 21, 22,  23

Based on the above settings, the solution diagram for the CR3BP family \L1 for $ \mu=0.01215$ appears in Figure 8.11.

Figure 8.11: Example



Gabriel Lord 2007-11-19