$RANDOM is an internal Bash function (not a constant) that
returns a *pseudorandom* integer in the range
0 - 32767. $RANDOM should ` not` be used
to generate an encryption key.

**Example 9-23. Generating random numbers**

#!/bin/bash # $RANDOM returns a different random integer at each invocation. # Nominal range: 0 - 32767 (signed 16-bit integer). MAXCOUNT=10 count=1 echo echo "$MAXCOUNT random numbers:" echo "-----------------" while [ "$count" -le $MAXCOUNT ] # Generate 10 ($MAXCOUNT) random integers. do number=$RANDOM echo $number let "count += 1" # Increment count. done echo "-----------------" # If you need a random int within a certain range, use the 'modulo' operator. # This returns the remainder of a division operation. RANGE=500 echo number=$RANDOM let "number %= $RANGE" echo "Random number less than $RANGE --- $number" echo # If you need a random int greater than a lower bound, # then set up a test to discard all numbers below that. FLOOR=200 number=0 #initialize while [ "$number" -le $FLOOR ] do number=$RANDOM done echo "Random number greater than $FLOOR --- $number" echo # May combine above two techniques to retrieve random number between two limits. number=0 #initialize while [ "$number" -le $FLOOR ] do number=$RANDOM let "number %= $RANGE" # Scales $number down within $RANGE. done echo "Random number between $FLOOR and $RANGE --- $number" echo # Generate binary choice, that is, "true" or "false" value. BINARY=2 number=$RANDOM T=1 let "number %= $BINARY" # Note that let "number >>= 14" gives a better random distribution #+ (right shifts out everything except last binary digit). if [ "$number" -eq $T ] then echo "TRUE" else echo "FALSE" fi echo # Generate toss of the dice. SPOTS=6 # Modulo 6 gives range 0 - 5. # Incrementing by 1 gives desired range of 1 - 6. # Thanks, Paulo Marcel Coelho Aragao, for the simplification. ZERO=0 die1=0 die2=0 # Tosses each die separately, and so gives correct odds. let "die1 = $RANDOM % $SPOTS +1" # Roll first one. let "die2 = $RANDOM % $SPOTS +1" # Roll second one. let "throw = $die1 + $die2" echo "Throw of the dice = $throw" echo exit 0 |

**Example 9-24. Picking a random card from a deck**

#!/bin/bash # pick-card.sh # This is an example of choosing a random element of an array. # Pick a card, any card. Suites="Clubs Diamonds Hearts Spades" Denominations="2 3 4 5 6 7 8 9 10 Jack Queen King Ace" suite=($Suites) # Read into array variable. denomination=($Denominations) num_suites=${#suite[*]} # Count how many elements. num_denominations=${#denomination[*]} echo -n "${denomination[$((RANDOM%num_denominations))]} of " echo ${suite[$((RANDOM%num_suites))]} # $bozo sh pick-cards.sh # Jack of Clubs # Thank you, "jipe," for pointing out this use of $RANDOM. exit 0 |

*Jipe* points out a set of techniques for
generating random numbers within a range.

# Generate random number between 6 and 30. rnumber=$((RANDOM%25+6)) # Generate random number in the same 6 - 30 range, #+ but the number must be evenly divisible by 3. rnumber=$(((RANDOM%30/3+1)*3)) # Note that this will not work all the time. # It fails if $RANDOM returns 0. # Exercise: Try to figure out the pattern here. |

*Bill Gradwohl* came up with an improved
formula that works for positive numbers.

rnumber=$(((RANDOM%(max-min+divisibleBy))/divisibleBy*divisibleBy+min)) |

Here Bill presents a versatile function that returns a random number between two specified values.

**Example 9-25. Random between values**

#!/bin/bash # random-between.sh # Random number between two specified values. # Script by Bill Gradwohl, with minor modifications by the document author. # Used with permission. randomBetween() { # Generates a positive or negative random number #+ between $min and $max #+ and divisible by $divisibleBy. # Gives a "reasonably random" distribution of return values. # # Bill Gradwohl - Oct 1, 2003 syntax() { # Function embedded within function. echo echo "Syntax: randomBetween [min] [max] [multiple]" echo echo "Expects up to 3 passed parameters, but all are completely optional." echo "min is the minimum value" echo "max is the maximum value" echo "multiple specifies that the answer must be a multiple of this value." echo " i.e. answer must be evenly divisible by this number." echo echo "If any value is missing, defaults area supplied as: 0 32767 1" echo "Successful completion returns 0, unsuccessful completion returns" echo "function syntax and 1." echo "The answer is returned in the global variable randomBetweenAnswer" echo "Negative values for any passed parameter are handled correctly." } local min=${1:-0} local max=${2:-32767} local divisibleBy=${3:-1} # Default values assigned, in case parameters not passed to function. local x local spread # Let's make sure the divisibleBy value is positive. [ ${divisibleBy} -lt 0 ] && divisibleBy=$((0-divisibleBy)) # Sanity check. if [ $# -gt 3 -o ${divisibleBy} -eq 0 -o ${min} -eq ${max} ]; then syntax return 1 fi # See if the min and max are reversed. if [ ${min} -gt ${max} ]; then # Swap them. x=${min} min=${max} max=${x} fi # If min is itself not evenly divisible by $divisibleBy, #+ then fix the min to be within range. if [ $((min/divisibleBy*divisibleBy)) -ne ${min} ]; then if [ ${min} -lt 0 ]; then min=$((min/divisibleBy*divisibleBy)) else min=$((((min/divisibleBy)+1)*divisibleBy)) fi fi # If max is itself not evenly divisible by $divisibleBy, #+ then fix the max to be within range. if [ $((max/divisibleBy*divisibleBy)) -ne ${max} ]; then if [ ${max} -lt 0 ]; then max=$((((max/divisibleBy)-1)*divisibleBy)) else max=$((max/divisibleBy*divisibleBy)) fi fi # --------------------------------------------------------------------- # Now do the real work. # Note that to get a proper distribution for the end points, the #+ range of random values has to be allowed to go between 0 and #+ abs(max-min)+divisibleBy, not just abs(max-min)+1. # The slight increase will produce the proper distribution for the #+ end points. # Changing the formula to use abs(max-min)+1 will still produce #+ correct answers, but the randomness of those answers is faulty in #+ that the number of times the end points ($min and $max) are returned #+ is considerably lower than when the correct formula is used. # --------------------------------------------------------------------- spread=$((max-min)) [ ${spread} -lt 0 ] && spread=$((0-spread)) let spread+=divisibleBy randomBetweenAnswer=$(((RANDOM%spread)/divisibleBy*divisibleBy+min)) return 0 # However, Paulo Marcel Coelho Aragao points out that #+ when $max and $min are not divisible by $divisibleBy, #+ the formula fails. # # He suggests instead the following formula: # rnumber = $(((RANDOM%(max-min+1)+min)/divisibleBy*divisibleBy)) } # Let's test the function. min=-14 max=20 divisibleBy=3 # Generate an array of expected answers and check to make sure we get #+ at least one of each answer if we loop long enough. declare -a answer minimum=${min} maximum=${max} if [ $((minimum/divisibleBy*divisibleBy)) -ne ${minimum} ]; then if [ ${minimum} -lt 0 ]; then minimum=$((minimum/divisibleBy*divisibleBy)) else minimum=$((((minimum/divisibleBy)+1)*divisibleBy)) fi fi # If max is itself not evenly divisible by $divisibleBy, #+ then fix the max to be within range. if [ $((maximum/divisibleBy*divisibleBy)) -ne ${maximum} ]; then if [ ${maximum} -lt 0 ]; then maximum=$((((maximum/divisibleBy)-1)*divisibleBy)) else maximum=$((maximum/divisibleBy*divisibleBy)) fi fi # We need to generate only positive array subscripts, #+ so we need a displacement that that will guarantee #+ positive results. displacement=$((0-minimum)) for ((i=${minimum}; i<=${maximum}; i+=divisibleBy)); do answer[i+displacement]=0 done # Now loop a large number of times to see what we get. loopIt=1000 # The script author suggests 100000, #+ but that takes a good long while. for ((i=0; i<${loopIt}; ++i)); do # Note that we are specifying min and max in reversed order here to #+ make the function correct for this case. randomBetween ${max} ${min} ${divisibleBy} # Report an error if an answer is unexpected. [ ${randomBetweenAnswer} -lt ${min} -o ${randomBetweenAnswer} -gt ${max} ] && echo MIN or MAX error - ${randomBetweenAnswer}! [ $((randomBetweenAnswer%${divisibleBy})) -ne 0 ] && echo DIVISIBLE BY error - ${randomBetweenAnswer}! # Store the answer away statistically. answer[randomBetweenAnswer+displacement]=$((answer[randomBetweenAnswer+displacement]+1)) done # Let's check the results for ((i=${minimum}; i<=${maximum}; i+=divisibleBy)); do [ ${answer[i+displacement]} -eq 0 ] && echo "We never got an answer of $i." || echo "${i} occurred ${answer[i+displacement]} times." done exit 0 |

Just how random is $RANDOM? The best way to test this is to write a script that tracks the distribution of "random" numbers generated by $RANDOM. Let's roll a $RANDOM die a few times...

**Example 9-26. Rolling a single die with RANDOM**

#!/bin/bash # How random is RANDOM? RANDOM=$$ # Reseed the random number generator using script process ID. PIPS=6 # A die has 6 pips. MAXTHROWS=600 # Increase this, if you have nothing better to do with your time. throw=0 # Throw count. ones=0 # Must initialize counts to zero, twos=0 #+ since an uninitialized variable is null, not zero. threes=0 fours=0 fives=0 sixes=0 print_result () { echo echo "ones = $ones" echo "twos = $twos" echo "threes = $threes" echo "fours = $fours" echo "fives = $fives" echo "sixes = $sixes" echo } update_count() { case "$1" in 0) let "ones += 1";; # Since die has no "zero", this corresponds to 1. 1) let "twos += 1";; # And this to 2, etc. 2) let "threes += 1";; 3) let "fours += 1";; 4) let "fives += 1";; 5) let "sixes += 1";; esac } echo while [ "$throw" -lt "$MAXTHROWS" ] do let "die1 = RANDOM % $PIPS" update_count $die1 let "throw += 1" done print_result # The scores should distribute fairly evenly, assuming RANDOM is fairly random. # With $MAXTHROWS at 600, all should cluster around 100, plus-or-minus 20 or so. # # Keep in mind that RANDOM is a pseudorandom generator, #+ and not a spectacularly good one at that. # Randomness is a deep and complex subject. # Sufficiently long "random" sequences may exhibit #+ chaotic and other "non-random" behavior. # Exercise (easy): # --------------- # Rewrite this script to flip a coin 1000 times. # Choices are "HEADS" and "TAILS". exit 0 |

As we have seen in the last example, it is best to
"reseed" the `RANDOM`
generator each time it is invoked. Using the same seed
for `RANDOM` repeats the same series
of numbers. (This mirrors the behavior of the
` random()` function in C.)

**Example 9-27. Reseeding RANDOM**

#!/bin/bash # seeding-random.sh: Seeding the RANDOM variable. MAXCOUNT=25 # How many numbers to generate. random_numbers () { count=0 while [ "$count" -lt "$MAXCOUNT" ] do number=$RANDOM echo -n "$number " let "count += 1" done } echo; echo RANDOM=1 # Setting RANDOM seeds the random number generator. random_numbers echo; echo RANDOM=1 # Same seed for RANDOM... random_numbers # ...reproduces the exact same number series. # # When is it useful to duplicate a "random" number series? echo; echo RANDOM=2 # Trying again, but with a different seed... random_numbers # gives a different number series. echo; echo # RANDOM=$$ seeds RANDOM from process id of script. # It is also possible to seed RANDOM from 'time' or 'date' commands. # Getting fancy... SEED=$(head -1 /dev/urandom | od -N 1 | awk '{ print $2 }') # Pseudo-random output fetched #+ from /dev/urandom (system pseudo-random device-file), #+ then converted to line of printable (octal) numbers by "od", #+ finally "awk" retrieves just one number for SEED. RANDOM=$SEED random_numbers echo; echo exit 0 |

The There are also other means of generating pseudorandom
numbers in a script.
The date command also lends itself to generating pseudorandom integer sequences. |